Cars & Trucks Logo

Related Topics:

h
hilary Posted on Jul 07, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2001 gmc safari. door will unlock with the fob but not the switch. that is all doors. also the cigarette lighter closes to the drive doesn't work. Check fuse good. Where is the door lock relay.

1 Answer

Denis Houle

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • GMC Master 1,414 Answers
  • Posted on Dec 22, 2018
Denis Houle
GMC Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 02, 2013
Answers
1414
Questions
0
Helped
498373
Points
4096

5 Related Answers

Anonymous

  • 247 Answers
  • Posted on Dec 19, 2008

SOURCE: 2000 Safari, power locks,Rear dutch door wont unlock,

can you use the key its self on the rear door. what i mean is not using the remote but actually using the key?

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 11, 2009

SOURCE: Power Door Lock Problem

The last post by maddog1321 was exactly what I had with my right rear door. The electric locks would not lock and unlock, and you almost couldn't do it manually without my feeling I was about to break something. I took the door panel off, oiled everything and got no relief. Finally, I saw the above post and drilled out the aft-most pop-rivet. THE WINDOW WORKED PERFECTLY! I didn't drill out the forward (closest to the handle) pop-rivet because I wanted to do one at a time so the solenoid would not fall out of place. I then put a new pop-rivet in place of the one I drilled out. I then reinstalled everything and the locks work like new.

Anonymous

  • 206 Answers
  • Posted on Apr 12, 2009

SOURCE: Automatic door locks / 2001 Chevy Suburban

Your book should give you program options for the door locks If your fob wont work either you got a relay for the door lock bad it is located in the fuse panel push the door lock button and find the one that is clicking

Anonymous

  • 2 Answers
  • Posted on Apr 21, 2009

SOURCE: 2002 Dodge Grand Caravan Driver Door Lock/Unlock Switch

sorry not sure the 12v prob will help this swtich works on 5v off 3v unlock 1v lock single wire lock/unlock logic signals
I found wiring diagrams at
http://www.dodge.com/bodybuilder/2004/docs/wd/rswd/tc.pdf
it is 2004 but use the wiring diagrams to test the wires
(most likely to fail where they flex)
because it is using logic gates disconnect the plug at each end of the wire you are testing or the damn thing will find a few diffrent ways to trick you.

ghost45

PAUL MC G

  • 1280 Answers
  • Posted on Sep 23, 2009

SOURCE: 2004 Hyundai Sonata door lock functions inoperable.

you have a bad relay.. the 'lock' relay.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Electronic door locks deactivated. Will not work using FOB or the electronic switch inside the doors.

Jay, If problems did indeed happen after that shop checked things, return and ask them to fix back to the way it was prior to them tinkering around.
0helpful
1answer

My power door locks and rear hatch on my 2000 GMC Safari will not work. Everything else is still working. Any idea of what may be wrong?

There are two fuses associated with the door locks system. The first is the Cigarette Lighter Fuse (Fuse 13 - 20A). This fuse provides power to the switches to activate the lock/motor relays. The second fuse is the PWR ACCY Circuit Breaker (30A). This provides the power thru the relay contacts to the lock solenoids/door motor. Both of the are in the Instrument Panel (IP) Fuse block.
0helpful
1answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...

reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.
0helpful
1answer

My locks on all my doors don't work with the key and the back door won't unlock at all. how do i fix this

I hate to state the obvious BUT... are you sure you have the right key? Will the key turn O.K.? Does it have electric locks and if so, will they lock/unlock with the remote key fob? Need more info, please . . .
0helpful
1answer

Central door lock not working .. YOUKON 1999 , 4 WD

i had that problem. door lock button, back window unlock button, speakers in door and cigarette lighter didn't work. turns out cigarette lighter fuse was out. replaced and now all work. so check all fuses.
0helpful
1answer

1999 porsche 996 replaced key fob battery disconnected battery now trunk releses are locked and cant access battery.How do you open frt trunk manually

Assuming the car battery is ok (if not, buy a male to male cigarette lighter at the auto store and connect to another car until charged enough to unlock the doors...but don't try to crank the ignition!). The trunks won't open if the battery went dead with the alarm set because arming the alarm physically locks the releases.

Sounds like the key code is switched off because you replaced the key fob battery. Try unlocking the car manual with the key in the door lock. Then switch the ignition on to reactive the keyless entry. If this does not work, you might also try pressing the fob unlock button with the key in the door lock until the dash led flashes.
2helpful
1answer

Need to reprogram new keyless entry fob.Thanks.

You may program up to 4 transmitters, using following procedure: 

Transmitter Programming Procedure (No Tools Required) 
Close all the vehicle doors. 
Insert the ignition key into the ignition lock cylinder. 
Press and hold the door unlock switch. 
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF. 
Release the door unlock switch. The doors will lock and unlock to confirm the program mode. 
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter. 
Repeat the previous step to program up to four transmitters. 
Turn the ignition switch to the RUN position in order to exit the key-less entry transmitter mode. 
Operate the transmitter functions in order to verify correct system operation 
1helpful
1answer

How do i reprogram my02 ford focus remote locking key fob please.

get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
Not finding what you are looking for?

167 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...