At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Need the reset procedure for the passlock system on 2003 chevy impala ive had the car scanned and no codes are poping Answered by verified Chevy Mechanic
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the ignition on (so dash lights come on) and stomp the gas pedal to the floor and release. Do this 3 times in 5 seconds leaving the ignition on. Wait 30 seconds, or until the message finishes flashing, then turn the ignition off. All set and don't stomp too hard!
These are pretty cool to do... no certifications or degrees required, lol. 1. turn the ignition switch to "on" (do not start) 2. press the accelerator pedal all the way down 3 times and on the 4th time hold all of the way down until the "oil life" resets (100%). 3. turn the ignition off and verify it reset. That's it! Let me know if you need anything else.
On a Chevy Impala or Monte Carlo with indirect TPMS, a totally different reset procedure is required. You can use the light switch or radio to reset the system. With the light switch procedure, turn the ignition on (engine off), the turn the light switch from OFF to parking lamps three times within five seconds. With the radio technique, turn the ignition on (engine off). With the radio off, hold the DISP button until “SETTINGS” is displayed. Use the SEEK button to scroll down the menu until you see “TIRE MON.” Press the PREV or NEXT buttons until “RESET” is displayed. Then press the DISP button again. You should hear a chime and see “DONE” to indicate the TPMS system has been successfully reset. Use the SEEK button to scroll through the menu until “DONE” is shown, then press DISP once more to exit from the learn mode. Thank you for using fixya and good luck
Are you reffering to the alarm or the pass lock system that put the theft light on.....If its the alarm the put the key in the door and unlock it. If its the pass lock system put the key in the ignition and turn it on and try to start the vehicle. After it shuts itself off leave the key on for ten min until the theft light stops flashing the turn key off and try to start it again. This may take a few times....
×