SOURCE: kenwood KDC-MP5028
with the unit in standby, press the menu key, use the joystick control to choose aux, and set the aux option to "on"...then press menu again to save...when you next switch on the unit, using the SRC button you can cycle through the available options...cd - tuner - aux..etc etc
SOURCE: pioneer DEH-P780MP
turn your head unit off, hold the function button and the functions menu to toggle the aux issue will pop up. its like an "off" function setting
SOURCE: 2000 Chevy Blazer
i am working on a s 10 of the same yaer and problem i will post my results after tomorrow when i have finished the job i bout this truck cause of the forum i own one that is a great one and this one is for experimental purpose i will let u know so far you cant lift the motor with a jack or a hoist so we r going another route in the mornin
SOURCE: 2000 Blazer stuck in 4WD
The first thing I would look at is the shift rod on the transfer case. If I remember correctly, it is on the drivers side and is a rod aboutsix inches long and has two ends that basically pop into rubber gromets. If that rod is bent in any way, or has come loose of the gromets, it will not shift into or out of the four wheel drive. If yours has electronic four wheel drive, the electric acutator could be out or going out. you should be able to remove the rod and simply move the switch by hand on the transfer case. It will get you out of 4 wheel drive until you have the ime to diagnose the electronics at least. It has happened to both my 1994 and 1999 S-10 blazers.
SOURCE: Panasonic KX-T7730-when receiver on hook plays on hold music
walk up to the phone and without touching anything else, press "1".
No music.
Carl
484 views
Usually answered in minutes!
×