What engine does yours have ? 3.8 or 4.6 Do you have a professional type scanner that will show sensor data parameters ? Is the check engine light on ,or anyother light's ? Wrench symbol .
012 Idle Speed Problems Idle Speed Wrong I know yours only dies when put into gear , idles fine in park an neutral . Just showing what scan data is , if your not familiar with it. With the problem your having it's a necessity to have a scan tool that can view data pid's . You could spend a lot of buck's just replacing part's on recommendations from people on here . Testing an not guessing is the way to find the problem .
SOURCE: 1986 Ford Bronco dies once it is put into gear
Sounds like a fuel mixture/vacuum problem. Vacuum advance line on the distributor could be loose/leaking/collapsed.
SOURCE: v40 hard to start and will not idle unless I give it a little gas
We had the same problem and found it was the fuel pressure regulator. Upon replacing it no longer gives any hesitation at startup.
SOURCE: 2002 Kia Spectra stuck gear shift
Sounds like you need a new shifter assembly, or the brake switch. Most likely will be the shifter though if you can move it out of park with the override.
SOURCE: my 93 ford probe gt wont idle and wont shift outa 2nd gear
Sounds like you need to check your vaccum lines for a leak. This is easy to do. Buy a can on carburator cleaner and with a friends help keep the car running as you spray your vaccum lines with the carburator cleaner one by one. If you have a leak it will **** the cleaner into the lines and cause the vehicle to stall out. Replace the line if this happens and continue checking all lines until all bad lines are replaced.
313 views
Usually answered in minutes!
×