Cars & Trucks Logo

Related Topics:

R
Ralph lucas Posted on May 19, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Reset pro96 My RadioShack pro96 will not power up. I have done all of the obvious checks. I have replaced batteries, checked the battery terminals in the radio and attached an external 6 volt power supply directly to the spring terminals in the radio. The unit will not power up after all the checks. I have not found on the internet any information for a hard reset. Any ideas? Thanks Ralph.

1 Answer

Luke

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Expert 42 Answers
  • Posted on May 19, 2018
Luke
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Jan 20, 2017
Answers
42
Questions
0
Helped
12900
Points
112

Https://forums.radioreference.com/radio-shack-scanners/346157-does-not-power-up.html
Might be a diode that’s blown. This forum at that web address is great for info on it.

5 Related Answers

Jason Morris

  • 362 Answers
  • Posted on Jan 11, 2009

SOURCE: After main battery replacement, the radio will not power up at al

Hi fasterboatma, Your computer stats are gone, the computer was reset when battery was disconnected, your radio is in theft mode, the radio is waiting on a code to be entered. The reason it does this is so if the radio was stolen it cant be used without the code. Look in your owners manual and see if the code is recorded there, if not call a local dealer and they can look it up, they will usually do it for free, if not you will have to take the front bezel off and see if you can see the code printed on the top of the radio. Let me know if I can assist further and please rate this solution. lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Ad

Anonymous

  • 6982 Answers
  • Posted on Apr 08, 2009

SOURCE: Replacement battery for Yellow Powered Corvette

I just checked and found one for fisher price cars on amazon...I'm not sure if it's what you want or need (no kids, never saw that battery) but I'll bet it's what you need! To get there, I typed in 12v batteries. Amazon was listed there as a source.

kdm56

  • 48 Answers
  • Posted on Apr 14, 2009

SOURCE: LOST ALLLL ELECTRICAL POWER, ONLY POWER IS AT THE BATTERY AND TO THE STARTER 12.67 VOLTS

near the battery you will find a box with fuse links in, one of them
will have blown, you can bridge it temporary with a piece of wire until you get the new one from your local dealers.hope this helps

Anonymous

  • 583 Answers
  • Posted on Oct 22, 2009

SOURCE: Will not charge

you will get some funny answers from some of these "experts " The symptoms suggest to me with out much doubt that the regulator is not doing its job correctly ,consistently.Iwould take it to an AUTO ELECTRICIAN and get it tested in situ.... there is only 4 things it can be , wireing ---battery---alternator-----regulator and of those the reg. is the only one that chops and changes. it will cost little for a sparky to check the reg ,. AND I WOULD LIKE TO KNOW THE OUTCOME

Anonymous

  • 2 Answers
  • Posted on Jan 21, 2010

SOURCE: 2002 ford escort zx2 negative ground harness

I am about to have the same problem with my 2002 ZX2. My shop called the Ford dealer and they can replace it for $450.00...
seems like an awful lot for a battery cable.
JS

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My aircon has stoped working..only thing i have done is replace batteries

Check if the batteries both are giving at least 1.5volts each. Clean the terminals of the remote control to secure proper contact with the batteries. Check if the negative terminal of the remote have enough pressure to keep the batteries firmly inside the remote control. Point the remote to the sensor of your air conditioner and press the power button. Changing direction of the remote control pointing to the air conditioner while pressing power button. If still air conditioner does not work clean the sensor eye to remove dust and switch again the unit.
0helpful
1answer

04 MGM, had rust in the battery terminals and it would not start after I cleaned started immediately now the Power locks, cabin, globe box, visors, and trunk lights dont work!all fuses OK Help!

If you had rust on battery terminals it is obvious that there is a lot more rust removing that has to be done. You neeed to go over every wire connection, fuse connection, etc and clean all out.
0helpful
1answer

Why my Honda horn keep beeping when connecting negative battery terminal

DOUBLE CHECK that you have connected the battery the right way and haven't put the positive on the negative. This is sometimes a warning that you have the terminals the wrong way round. If the battery is fitted correctly check the fuses.

CHECK THE MARKINGS ON THE BATTERY + & - ARE GOING TO THE CORRECT TERMINALS
0helpful
4answers

How do I replace the starter?

The fact that it starts when you jump it makes me believe it is not the started. I think a dirty, loose, or bad battery cable connection -- or it could be a bad battery cable itself.
0helpful
1answer

Low power on toyota 2007 camry. Do I need to reset by reinstalling the new battery?

The fuse and relay box is located in the engine bay area. Please lift up the cover by pressing front and rear locks, and find the ECTS fuse (10 Amp). Location and diagram of the fuse is printed underside the cover. Remove the fuse, check the fusible link. Replace it with the same rating, if it is blown.
After replacing the fuse, remove the EFI fuse in the same relay box or remove the battery terminal for 10 Sec.
Fix the fuse back to its place or reconnect the battery terminal.
Start the car. It should now perform well.
If the problem persists, retrieve the error code and put it here.
Hope that works.
0helpful
1answer

Battery terminals were removed to clean,when reconnected the battery,my anti theft alarm has disabled the ability to start it

Raise the hood and use the battery terminal wrench, or a standard box wrench, to remove the negative battery cable. Wait 15 minutes before reconnecting the cable, then repeat Step 1. If your Mountaineer still will not start, and the flashing red light begins blinking rapidly when you attempt to start it, something is obviously malfunctioning. Either have the key reprogrammed or have more extensive troubleshooting and repairs done to the P.A.T.S. system by a certified technician.
1helpful
2answers

2002 Chevy Suburban...Power/Battery?

Make sure battery is fully charged, try jump starting it, if it starts, and you can get a volt meter, put the test leads on the battery terminals, red positive black negative, have the dial on the meter at 12volts DC.
With the motor running, the meter should read between 14 and 15 volts, below that, the alternator isn't charging and needs replacing.
If it still clicks with a jump, the starter solenoid is bad and needs replacing. The solenoid is on top of the starter, which has to be removed to fix it.
1helpful
1answer

After replacing the battery I have no power at all

Possible causes:
1. New battery defective. ( Open circuit between battery cells ) Seen it before, therefore, possible.

2. Battery terminals not making connection ( check terminals )

3. Battery has different polarity than the original battery. ( Positive post and the negative post are reversed ) They do sell the reverse battery, therefore, possible. Basically, a battery hooked up backwards.
That would cause the Main fuse to blow resulting the no power in the vehicle.
8helpful
3answers

Engine light 2006 pontiac g6(reset)

first be sure that its the engine light and not the "service" light. the service light will usually illuminate if its time for an oil change. if its the service light ur owners manual should tell u how to reset it. if its ur engine light then try disconnecting ur positive battery cable for 1 minute. that should reset ur ecm and get rid of the engine light. if the engine light comes back on then have a diagnostic scan done to determine whats causing it. LJ
Not finding what you are looking for?

74 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...