2006 Chrysler PT Cruiser Logo

Related Topics:

Anonymous Posted on Mar 28, 2018

06 pt cruiser keeps stalling while driving randomly sets p2047 but emediately goes away

5 Related Answers

Anonymous

  • 4 Answers
  • Posted on Oct 22, 2008

SOURCE: 06 PT Cruiser - Stalling - Rough Idle

HI;

I AM A CHRYSLER PARTS/SERVICE MANAGER AND HAVE SEEN THESE TURBOS BLOW INTAKE TO PLENUM GASKETS. WE ARE A SMALL DEALER AND HAVE SEEN 3 HAPPEN AND ALSO WAS VERY DIFFICULT TO DIAGNOSE. WE WERE ABOUT TO PULL THE HEAD ON ONE WHEN WE FOUND THE GASKET SUCKED IN. PART IS CHEAP AND REPAIR NOT TERRIBLE .HAVE YOUR TECH SPRAY CLEANER AROUND SEAM BETWEEN INTAKE AND PLENUM ENGINE SHOULD DIE DOWN WHEN YOU HIT THE LEAK

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 24, 2009

SOURCE: I need to find a fuse diagram for a 06 pt cruise for under hood

There is a diagram in the owners manual.

Anonymous

  • 6 Answers
  • Posted on Apr 01, 2009

SOURCE: i have a 06 pt cruiser the battery light came on

there is a tsb on that in the dealerships i belive there is a flsh for the computer to fix this problem i have been a mechanic at a chrysler dealership for 9 years now and that is a pretty common problem

Anonymous

  • 90 Answers
  • Posted on Mar 23, 2010

SOURCE: My airbag light goes on and won't turn off on my

your car has several air bags and quite a few different sensors and such. you will need to have the codes pulled and diagnosed by a qualified technician.

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Mar 31, 2011

SOURCE: While idling, my pt cruiser

its not being told to speed the idle up under load ,now on the back of the steering rack just behind where the steering goes into it is a sensor that increases the RPM on idle when steering is turned but i have found that if this sensor isnt working not only does steering slow engine down but also AC ?? why when they are not related i dont know i just know it does ??

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

06 pt cruiser randomly stalls while driving sets code p2074 but instantly goes away and never sets any history codes

Codes translate as...
P2074 = Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Higher Load.
P2047 = Reductant Injection Valve Circuit/Open Bank 1 Unit 1 The first is the air intake system and the second is the fuel delivery system.
0helpful
1answer
0helpful
2answers

Pt cruiser stalling

check loose main connections
0helpful
1answer

06 pt cruiser no start/no fuel presure

fuel pump fried need new fuel pump check your fuel pump relay make sure its good.
0helpful
1answer

My airbag light goes on and won't turn off on my PT CRUISER 06

your car has several air bags and quite a few different sensors and such. you will need to have the codes pulled and diagnosed by a qualified technician.
2helpful
1answer

ECM CODE P2047 05 PT CRUZER 2.4 TURBO

This code p2047: P2047 Reductant Injector Circuit/Open
First thing to check are the plugs. If plugs are dirty, this would be the most common source of your problem. If the plugs are good, then it could be either a bad fuel injector or bad ground.
1helpful
1answer

Random stalling, even while driving

Either you have a leaky vacuum line, or faulty throttle position sensor or other sensor. Many part stores will read your engine codes for free. This will pinpoint exact problem area
0helpful
1answer

Liftgate ajar light on when liftgate is closed when driving interior light are on. I open and close liftgate, but no such luck liftgate ajar light on and all interior lights when driving

I recently had a similar problem with the "liftgate ajar" light lighting randomly on my 2001 PT Cruiser. It was even occurring AFTER I had disconnected the "ajar sensor" on the liftgate. Finally found that 5 wires were broken, one of them the liftgate ajar sensor wire, in the wire bundle that leaves the top of the liftgate and goes into the chassis. I suspect that those broken wires would randomly trigger. Inline spliced the wires and resealed the bundle. Everything looks good for now, although time will tell.
7helpful
3answers

06 PT Cruiser - Stalling - Rough Idle

HI;

I AM A CHRYSLER PARTS/SERVICE MANAGER AND HAVE SEEN THESE TURBOS BLOW INTAKE TO PLENUM GASKETS. WE ARE A SMALL DEALER AND HAVE SEEN 3 HAPPEN AND ALSO WAS VERY DIFFICULT TO DIAGNOSE. WE WERE ABOUT TO PULL THE HEAD ON ONE WHEN WE FOUND THE GASKET SUCKED IN. PART IS CHEAP AND REPAIR NOT TERRIBLE .HAVE YOUR TECH SPRAY CLEANER AROUND SEAM BETWEEN INTAKE AND PLENUM ENGINE SHOULD DIE DOWN WHEN YOU HIT THE LEAK
Not finding what you are looking for?

467 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...