Question about Chevrolet Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check for a vacum leak from the engine to the a/c.The color of the hose is black. Also check if the heater control valve hose is unplugged. If you have vacuum the it sounds like the door for the vent/floor/defrost is broken.
Posted on Jun 08, 2009
Some thing you could look at would be this. The control is usually fed by a vacuum line or small hose thats is connected to your intake manifold.
With a cold engine,look for a skinny vacuum hose that runs from the intake toward the fire wall . It should be going inside the cab and connecting to the A/C vent control.Some times the hose becomes disconnected or splits or cracks due to heat under the hood.
Thats usually the trouble.
I hope this helps you.
Posted on Oct 06, 2009
The problem is that the plastic lines that the air flows through get frail and cracks and breaks.What happens is when the hose breaks you loose vacuum and the system reverts to defrost mode.You should be able to see it from under the hood on the passengers side.You will have to find the area that is broken and then go to the parts store and get some rubber hose that will fit over the plastic hose.Take a piece of the plastic hose with you so you can get the right size hose to fit over it.This just happened to my 97 Astro van.I found the broken hose and repaired it with the rubber line and is working normal now.Hope this helps.Let me know what you find out.Good luck.
Posted on Jul 20, 2010
Tips for a great answer:
Dec 12, 2017 | Cars & Trucks
Dec 21, 2015 | AC Cars & Trucks
Jun 17, 2015 | 2010 Chevrolet Equinox
Oct 05, 2014 | 2011 Chevrolet Equinox
Apr 23, 2017 | Chevrolet Equinox Cars & Trucks
844 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: