Changing the emergency brake cable on a 1998 saturn sl1

SOURCE: 2003 silverado HD adjust emergency brake cable?

first you need to check the rear brakes ,the emergency brakes work off the rear brakes, there is an adjustment on the center of cable that goes between both rear brakes,hope this is some help,thanks robert b.

Ricky Gittins

• 715 Answers
• Posted on Jul 29, 2009

SOURCE: 1999 Saturn SL1 manual...shifter cable bushing

Hello:
NAPA sells the replacement bushing ($20) better than Saturns $200 to replace both cables.
Good luck

SOURCE: Changing spark plugs on 2001 SL1 Saturn V-4

Remove the plugs, make sure the new plugs are gapped to .040, put anti-seize on the threads of the new plugs, then install them and tighten accordingly.

SOURCE: i have a 1998 saturn sl1 with a code PO452 how do

CODE PO452 IS FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT CONDITIONS.YOU COULD HAVE A FAULTY FUEL TANK PRESSURE SENSOR.

SOURCE: CHANGED EMERGENCY BRAKE CABLE ON 1998 FORD RANGER

change brake switch. my son just changed my brakes and the lights for both regular and emergency brakes stayed on, we changed the switch and now just the emergency brake needs adjusting so that light will go out too <!-- from fixya rte -->