2002 Chevrolet Malibu Logo

Related Topics:

J
Jackie Sumner Posted on Feb 25, 2018

My 2002 Malibu's blinkers don't work. The switch has been replaced and the bulbs and fuses are good. How do I get it fixed?

5 Related Answers

Anonymous

  • 41 Answers
  • Posted on Nov 04, 2008

SOURCE: blinkers

If you can turn the blinker on left or right and the light comes on but doesn't blink......Open the drivers door, there is a fuse box, On the side of the dash.. The relay willl be a small silver canister looking relay in with the fuses.. put your finger on it and turn the blinker on.. you should feel and hear a click...( With the key in the on position ).. That is what needed replaced if it doesn't keep clicking...Thats the turn signal relay... What makes it blink.......Hope this helps..
Please rate this solution if it helps... Thank You.....

Ad

Anonymous

  • 10865 Answers
  • Posted on Mar 11, 2009

SOURCE: blinker relay switch for 2001 jeep cherokee

What you need to change is the flasher. Go to any auto parts store and buy one. Ask them to help u change it.

please mark this as a fixya! thanks

Anonymous

  • 578 Answers
  • Posted on Jul 01, 2009

SOURCE: rear light problems

check all the wiring for that light and if u have power in all that mean you may have replace the wrong type bulb

Anonymous

  • 1 Answer
  • Posted on Aug 30, 2009

SOURCE: my 2002 f150 dash board lights do not work. The

You might need a new cluster .... or it is p[ossible you installed a new stero in the vehichle and one of the wires that were not used from the harness to connect to the cd player may not have been wrapped and are causing a ground.

rodandmargco

Roderick Cochrane

  • 153 Answers
  • Posted on Apr 19, 2015

SOURCE: 06 f150 4x4

With all these rear light problems try a squire of CRC or WD40 to dry out the globe holders and then give a good EARTH

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuse box

What kind of car? I have a 2005 Chevy malibu that the light quit blinking, in my case it was the connectors in the bulb socket. Somehow when you remove the old bulb it pushes them back so they no longer connect and the blinker stops working. If this is the case you just need to bend them back but be careful not to break or you can by new outlet assembly for $20. Also the blinkers didn't have a fuse just a relay switch if this goes out you would have problem with multiple lights
1helpful
1answer

How do i fix my blinkers on my 1971 f100 ford ?

There is a flasher unit for the turn signals, separate from the hazard flasher, that is under the dash. If the fuse for the turns is good, and you already know the bulbs are good since the hazards work, then you may have a bad turn signal switch.
When you use the turn switch, do the bulbs come on and stay on, or nothing? If they come on and don't blink, then it's probably a bad turn flasher unit. If they don't come on at all, suspect a bad turn signal switch. But first check the fuses, then pull off the connector to the turn switch and see if you have one hot wire there, with key on. That one hot wire will be from the fuse.
1helpful
1answer

I have replaced all my blinker light bulbs and allthe fuses. Put in new flasher fuses and pulled blinker arm and replaced with kit. And the break lights and and blinkers still don't work

on the brake lights, check to be sure the switch located at the top of the brake pedal isn't stuck, you can Jumper the switch to see if that works,
2helpful
1answer
0helpful
1answer

'05 Chevrolet Malibu - Front Right Blinker is not Working

You need to check for power coming out of the turn signal switch with a test light, or voltmeter. On older Chevys, the R/F turn signal wire is dark blue. Check the color of your wire at the bulb socket, then locate the turn signal switch connector, and probe that color wire with the ignition switch on, and turn signal switch in the right position. If you have power coming out of the T/S switch, you have bad connection, or open circuit between it and the bulb socket.
0helpful
1answer

Rear light problems

check all the wiring for that light and if u have power in all that mean you may have replace the wrong type bulb
0helpful
1answer

2004 Cherolet Malibu turn signals work sometimes

the switch in the column has dirt in it or is coming apart most likely.always replace bulbs and flasher(s)
first ,then column switch before spending any money on signal diagnosis. for 15$for bulbs,flasher,20-40$switch,you 90%would have solved problem. gino r.
Not finding what you are looking for?

409 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...