Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Feb 23, 2018

Replacing a 2008 dodge caravan rear wiper arm

I have cut off the rusted piece from the stem of the motor but the replacement arm will not fit over it

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Apr 26, 2009

SOURCE: Rear Wiper Arm Replacement

i can not remoce the rear wiper blade to replace it can u help

Ad

Anonymous

  • 1392 Answers
  • Posted on May 30, 2009

SOURCE: How to remove rear wiper arm

Remove the nut holding the arm. Should be able to lift up on the arm and loosen the joint at the motor.

Quinn Kessler

  • 85 Answers
  • Posted on Dec 07, 2009

SOURCE: How do I replace the rear wiper arm on a 2008 Kia Sedona

Your wiper arm has an interference fit which means it is essentially pressed on. The best way to remove it is to buy a wiper arm puller, which will have two arms that fit underneath the arm and a bolt that will push on the wiper post, they are pretty slick it should pop right off. Any auto parts store should be able to furnish you with the tool. If you're not going to use it alot, you might call your dealership (or friend with lots of tools) and see if they will pop it off for you.

ZZZoom

  • 151 Answers
  • Posted on Jan 27, 2010

SOURCE: Can't remove rear wiper to replace on 96 caravan

Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)

Anonymous

  • 193 Answers
  • Posted on Feb 26, 2010

SOURCE: replace the rear wiper arm shaft

There is a plastic cover that pops off at the pivot end of the wiper arm. pulling up on this with a hook of some kind from the furthest end should release it. Under it you will find a nut that holds the wiper arm to the shaft. It's quite common for the nut to come loose and the shaft spins without moving the arm. Try tightening this nut (with the ignition on, be sure the wiper motor is off, then turn off ignition and put the wiper arm in the parked position). This is a common problem if you've ever tried to turn on the wiper when it was frozen to the glass.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2008 Dodge Ram wipers would work on intermittent and regular speed, but stop when switched to high speed. Now won't work at all except for short movement occasionally when switched on.

ck for rust around bolts that mount the motor , I had a car that did this and turns out that rust made bad ground connections from a worn out bushing around shaft seal to wiper arm
1helpful
1answer

Can't find a Rear Wiper Arm replacement

Try looking in a breakers yard or check ebay to see if anyone selling your part.
0helpful
1answer

How do i replace the window shield wiper blade

The 1998 Dodge Grand Caravan has the most common hook-end wiper arms. See related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.

1998 Dodge Grand Caravan Wiper Blade Installation Videos (hook front, hook rear)

1998 Dodge Grand Caravan Wiper Blade Size Options w/Correct Lengths & Attachments
5helpful
1answer

Can't remove rear wiper to replace on 96 caravan

Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)
2helpful
1answer

How do you replace the rear wiper motor on a 2003 grand caravan? Wiper arm was frozen, I think the motor blew. I checked the fuse it's OK.

you will need to remove the rear hatch panel,and take the nut and rear wiper off,then the motor bolts are easy to get out.
3helpful
1answer

How to remove rear wiper arm

Remove the nut holding the arm. Should be able to lift up on the arm and loosen the joint at the motor.
1helpful
1answer

Rear wiper motor not working

Remove the wiper arm. Lift the hatch up. Remove all related trim around the hatch. Unbolt the wiper motor, and install in reverse order.
0helpful
1answer

Removing rear wiper arm 1992 grand caravan

If this is a factory wiper arm look at the area where it hinges. There should be a small hole in the metal. Find a drill bit or shaft that fits the hole. Lift up on the arm, insert the drill bit. When you release the arm it should be raised of the glass supported by the drill bit. Now without pressure applied to the glass you should be able to wiggle it off the shaft of the motor. Hope that helps.
Not finding what you are looking for?

165 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...