Cars & Trucks Logo

Related Topics:

C
Carl Wilson Posted on Feb 05, 2018

What is the legth of a chevy s10 steering colume

5 Related Answers

Anonymous

  • 1990 Answers
  • Posted on Jan 18, 2009

SOURCE: 2001 chevy 2500HD sterring colum

It should be Ok as long as the Replacement has the Same connections as the Old one.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 10, 2009

SOURCE: steering colum fitment prob

Yes they will interchange, the parts for each are the same part numbers..

Anonymous

  • 317 Answers
  • Posted on Nov 07, 2009

SOURCE: replacing spark plugs

theres a rachet with a hinged head on it...great investment for a person changing plugs

Anonymous

  • 218 Answers
  • Posted on Jun 06, 2010

SOURCE: will a 1985 S10 blazer tilt steering collum fit a

yepper! lol i have owed 5 of this geneation and both the s-10 and blazer are identical in the dash, engin and drive train

JOHN LAPIER

  • 2602 Answers
  • Posted on Feb 16, 2011

SOURCE: sterring colum is very loose

LOOk on the top of the steering box in the middle there is a stud with a nut threaded onto it this is the adjustmemt for steering wheel play . Loosen the nut and take a stright head screw driver put it in the slot in the stud and turn it in . rembember you should have an inch or so free play in the steering wheel this will tighten it up then tighten the nut back down

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1994 chevy s10 dash gauges turn off back on while

ck the ground located under the steering colum at the edge of the dashboard
0helpful
2answers

My 94 chevy s10 blazer is leaking power steering fluid pretty bad from the lines or pump itself. How many lines are there for the power steering pump.

the main one is the feed which is pressurised and the main cause is the flexible rubber pipe ,they perish and go porous ,take this pipe off and have the rubber part replaced in a hydraulic type place that does industrial type work ,might cost 20 euros if that
5helpful
2answers

Where is the ignition switch in an 1989 chevy S-10

Remove lower dash panel, under steering wheel, there will be a bracket that holds steering wheel, remove both 15mm nut's that point up, not the 13mm bolt's the screw into the colum , steering wheel will come down enough where you will see the ignition switch on the top side of the colum, the switch will be screw to the colum with the head light dimer switch.
1helpful
1answer

Will a 1985 S10 blazer tilt steering collum fit a

yepper! lol i have owed 5 of this geneation and both the s-10 and blazer are identical in the dash, engin and drive train
0helpful
1answer

How do you change a 1986 chevy celebrity steering column?

  1. take off bottom dash cover
  2. bottom of colum has a bolt and nut that has to come off
  3. then theres 4 bolts holding colum up remove bolts colum will drop
  4. unplug electricalal conection
  5. pull colum out
1helpful
1answer

Steering colum fitment prob

Yes they will interchange, the parts for each are the same part numbers..
1helpful
1answer

2001 chevy 2500HD sterring colum

It should be Ok as long as the Replacement has the Same connections as the Old one.
Not finding what you are looking for?

47 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...