SOURCE: serpentine belt on 1992 dakota
You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.
Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.
Hope this helps, and please rate my answer.
SOURCE: heater control valve
Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?
SOURCE: 1998 dodge ram 1500 v85.2 towing capacity?
according to the owners amnual the max towing weight for a 1999 ram 1500 quad cab wit automatic transmission is 7600 lb.
with either 5.2 or 5.9 v8. for a reg cab it is 8000 lb.
SOURCE: 1992 dodge dakota 5.2L wont shift into overdrive
I have the same problem and i cant figure out the solution either one day it worked next day it didnt
375 views
Usually answered in minutes!
×