Power Steering Fluid Reservoir Outlet Hose Replacement
Removal Procedure
Click to Enlarge
Click to Enlarge
Installation Procedure
Hope this helps a little.
SOURCE: My power steering pressure hose has a leak.
i pERSONALY WOULD REPLACE IT MYSELF EVEN WITHOUT MY 30yrs Of Experience in this Field. I have Enclosed Instructions for you to use. PLEASE dont Forget to RATE me As MOST folks DONT remember to that is how WE Get our Ratings such as GURU THANK YOU and Good Luck On The Job, Dont PAY a dime If YOU CAN > D I Y
REMOVAL PROCEDURE
SOURCE: 2008 gmc acadia low beam light bulb changing
how do you change the low beam light bulb on the 2008 gmc acadia
SOURCE: how to change the headlight on gmc acadia 2007 (driver's seat)
the low beam bulb?? it's not that hard turn the wheels to gain access to the wheel well and loosen the inner fenderliner (plastic) to gain access to the back of the headlamp assy
SOURCE: how to replace headlight on 2007 gmc acadia
first if you are changing the bulb only and it is a HALOGEN
there is a round acess hole in the inner fender remove it and change the bulb
if you have HID lights or are changing the head light assembly then you have to remove the front bumper facia
hope this helps
hope you have HALOGEN lights
SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED
have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds
Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"
319 views
Usually answered in minutes!
×