The fuse box is usually next to the engine, near the battery. A black plastic box with a lid that unclips.
Does this look like what's inside?
If Yes, you will need a 15 Amp, (blue), blade fuse to go into position number 14. There will be a diagram somewhere on the lid of the fuse box, (inside or on top), showing where this is.
Yeah, it doesn't work the way you think it does. The horn switch doesn't actually switch power to the horn. It's an input signal to the instrument cluster. When you press the horn button, the instrument cluster sees the signal and sends a digital signal to the Totally Integrated Power module under the hood. The TIPM sends power to the horn....there is no separate fuse for the horn. Check for power on the green/yellow wire right at the horn when you press the button. If you get battery voltage, everything up to that point is good. Then check the black wire for good ground. If that's good, your horn is shot.
In the fuse box
Your horn may be shorted out and need to be replaced.
SOURCE: 1986 toyota pickup horn malfunction
hi
Check whether power is coming to horn.
if ok means then check the horn
thank you
SOURCE: how will not blow on 2006 pt cruiser
1st check fuse. Then see if power is coming to horn. A simple power checker can be found at most auto parts store. It may also have a horn relay. Look up your wiring at cargrus. If you still have problems contact me back.
SOURCE: Horn Solution
The horn is located in the front fenderwell on the passenger side behind the inner fender. You can't see it until the inner fender is taken out of the way.
SOURCE: 2001 VW Jetta Horn issue
replace the horn.thesecurity system should have a seperate horn to the normal "tooting" horn.
3,702 views
Usually answered in minutes!
×