SOURCE: Body Control Module for my 96 Bonneville SSEi?
The BCM is a dealer or junk yard only item. When a new one is installed it must be programmed at a factory dealership
SOURCE: How do I take out replace the heater coil in my S-10 Chevy truck?
No you do not, I think you mean the heater core, because its leaking, first unhook heaters hoses under hood (there may be a clamp on the core tubes that has to come off), next go under dash on passengers side, take the one bolt to the far right under dash by the dome light, thats so you can pull the dash out just enought to get the cover off the front of the heater box, behind that cover is the heater core, now that cover is held on with about 6 1/4 inch screws give or take 1 or 2 when you get the cover off you will see 2 straps, one on each end that hold the core in place, there are 2 1/4 screws in each one, remove them and core will come out. Put back together in reverse order.
SOURCE: no cruise control, fuses under dash front left
there is one under the dash it is in the top row ether a 15 or 20 my car did the same dose your cruse light come on if so it some thing else
SOURCE: 2002 chevy S10 LS V6-4.3 under hood and under dash vac. hoses diagrams
I suggest you try your public library. We do not have these diagrams.
If the Water smells like Antifreeeze then it is your HEATER CORE
If the water smells like Water or Dirty Water, then you have a LEAK.
Here is a TRICK..
Get an Aresol Can of WINDOW CLEANER.... Spray completely around your Windshield on OUTSIDE EDGES... YOU WANT IT FOAMY.
Get an AIR HOSE and BLOW the Windshield from the INSIDE and see where the leak is coming from.....
It has ALWAYS worked for me
107 views
Usually answered in minutes!
some GM vehicles ..expecially 95 96 BCM are located behind glovebox
×