Firing order is clock wise rotation. You can see firing order in picture. You can see how cylinders are numbered. I did show number one terminal on distributor cap, according to my database. I don't like to do that because I've seen many pictures that were wrong. If you put number one piston on tdc of compression stroke, which ever spark plug tower the rotor is leading into is number one, then follow firing order around cap in direction of rotation. Just my opinion.
I looked at 93 chevy pickup, 350 engine.
SOURCE: spark plug wiring
the firing oder is 1-8-4-3-6-5-7-2 at 4 degrees before top dead center\turn the crankshaft pulley to 4degrees, then the rotor should be pointing at the no.1 cylinder,
SOURCE: Need a diagram for a
I found a belt routing diagram for you at: http://www.2carpros.com/car_repair_information/tec_info/1993/chevrolet/suburban/1993_chevrolet_suburban_drive_belt_routing_diagram.htm
I hope this helps!
SOURCE: spark plug wire diagrame
replace plugs 1 at a time unplug spark plug wire unscrew plug with socket wrench,check plug gap to make sure their to motors specs,install!
SOURCE: spark plug wiring diagram 1997 chev z71 5.7 liter
try these two websites www.autozone.com and the other one is www.alldatadiy.com and i also would like to give you this information if you every have any hard to find GM- parts its Schram auto & truck parts they sells only GM parts 1-800-292-1032 and they website is www.schramauto.com
SOURCE: spark plug wiring diagram for a 1993 chevy
Distributor turns clockwise. Number 1 at 5 oclock position. Firing order is 1-6-5-4-3-2
342 views
Usually answered in minutes!
×