Question about Saturn Cars & Trucks

Open Question

2001 saturn sl1 valve pan bolt size they are star shaped and stripped out its a 1.9 sohc

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 125 Answers

SOURCE: where is the transmission filter?

from what i can gather there is no filter replacement, only a fluid exchange. this info is coming from a rather good borderline great mech. program.

Posted on Sep 16, 2008

Ad

Richard Delahant

  • 1201 Answers

SOURCE: egr valve on a 2002 Saturn SL1

Take off air breather tube,you should see a cone shaped part, on top and at back of engine right by the gas pedal cable. Remove the 2 10mm bolts, and it should come right off.

Posted on Mar 16, 2009

Anonymous

  • 5 Answers

SOURCE: Changing spark plugs on 2001 SL1 Saturn V-4

Remove the plugs, make sure the new plugs are gapped to .040, put anti-seize on the threads of the new plugs, then install them and tighten accordingly.

Posted on Aug 25, 2009

Molson02536

Harvey N Tawatao

  • 3854 Answers

SOURCE: how do you change an egr valve on a saturn sl1

Quite easily take off the air breather tube then there is a cone shaped part with a connector on top at the back of the engine right by the accelerator cable 2 10mm bolts hold it on take off the 2 bolts and the valve comes off. If your still not sure you can buy a new EGR valve or if your going to just clean it to save you some money, you can use Carb cleaner which you can get at Auto Zone and they can give you the step by step instruction's free of charge to replacing the EGR valve  on you car with common tools. Good luck 

Posted on Sep 16, 2009

Ted Schore

  • 7353 Answers

SOURCE: catalyst monitor not ready e vap system monitor

You will just need to drive it, it may take days to run the monitors.

Posted on Nov 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the valve cover from a 1997 saturn sohc


I have a 1997 SOHC (Single Overhead Cam) SL-1 and it is not difficult at all to remove the Valve Cover. There are 2 small "Star" indentations in the top of large round discs - these are actually screws.


Although the screws SHOULD screw out using a star driver - that hardly ever works. Over a period of time the screws "set" pretty solid and are hard to get off - you end up striping out the star head. I removed mine just a few days ago to replace the gasket and what I did was got a pair of PIPE vice grips (The jaws are round instead of flat) you have to carefully lock them onto each of the round disc screws so that the jaws are exactly left and right - the handles of the pliers should be pointing right in the middle of your chest as you're standing in front of the car.


With the pliers locked, very carefully wiggle them back and forth - RIGHT then left - very slowly and the screws will start to move, when they do then you should be able to screw them out with your fingers or at that point use the star driver.


The reply that mentioned the 10 bolts, and the spark plugs in the middle refer to a DOHC (Dual overhead Cam) Since you inquired about a SOHC there should only be the 2 large round "Disc" looking bolts - one to the left and one to the right.


Make sure you get ALL of the old gasket off of the head and cover so the new one will "Seat" good.

May 07, 2012 | 1997 Saturn SC

1 Answer

What type of engine do I have in my 1998 Saturn SL1?


if it is an SL1 it has a SOHC 1.9L. Basically the same engine was in all saturns 91-99, just different heads. the Sl2 had double over head cam and the Sl1 had SOHC.

Sep 29, 2010 | 1998 Saturn SL

1 Answer

Does a saturn sl1 2001 have a single or double transmission?


An SL1 has a single overhead camshaft, SOHC, engine. It has but one transmission. If it has a clutch pedal next to the brake pedal, it is a manual shift/transmission, if there is only a brake pedal, then it is an automatic transmission.

Mar 02, 2010 | 2001 Saturn SL

1 Answer

How do I replace the gasket and transmission oil in a 1998 Saturn SL1?


simply unbolt the trans pan under the trans and the oil falls to the ground... clean the pan with clean rag. get all old gasket off.. place new gasket in and bolt the pan back into place. tighten the bolts to around 7 lbs. do not over tighten the bolt, you could strip the threds. put new trans fluid in through the dip stick hole that you check the level.

Jan 31, 2010 | 1993 Saturn SL1

1 Answer

Need to know what to tighten head bolts to on 1992 saturn sl1


DOHC - Tighten all bolts in sequence to 22 ft. lbs. (30 N.m). Then tighten all bolts to 37 ft. lbs. (50 N.m). Repeat sequence, tightening all bolts an additional 1/4 turn (90 degrees).

SOHC - Tighten all bolts in sequence to 22 ft. lbs. (30 N.m). Then tighten all bolts to 33 ft. lbs. (45 N.m). Repeat sequence, tightening all bolts an additional 1/4 turn (90 degrees).

Torque Sequences

Jan 26, 2010 | 1992 Saturn SL1

1 Answer

How do you change an egr valve on a saturn sl1 2001


Quite easily take off the air breather tube then there is a cone shaped part with a connector on top at the back of the engine right by the accelerator cable 2 10mm bolts hold it on take off the 2 bolts and the valve comes off. If your still not sure you can buy a new EGR valve or if your going to just clean it to save you some money, you can use Carb cleaner which you can get at Auto Zone and they can give you the step by step instruction's free of charge to replacing the EGR valve  on you car with common tools. Good luck 

Sep 16, 2009 | 2001 Saturn SL

2 Answers

Stripped oil plug


If you use a good pair of vise grips you may be able to get it off if you adjust the visegripes just beyond your ability to clamp them and then proceed to clamp them shut with a large pair of channel lock pliers, if this does not work drill the appropriate size hole through the bolt and tap in a large easy out bolt extractor into the hole drilled and proceed to use a star socket
on the end of the extractor to unsrew the frozen oil pan bolt.

Jul 16, 2009 | 2001 Buick LeSabre

1 Answer

Odometor stop working on 92 Saturn SL1


Take out your gages under the dash and send them out to get fixed they are speed operated. What most likely happend is the dial in back the odometer is stripped.

Mar 23, 2009 | 1992 Saturn SL

2 Answers

Egr valve on a 2002 Saturn SL1


Take off air breather tube,you should see a cone shaped part, on top and at back of engine right by the gas pedal cable. Remove the 2 10mm bolts, and it should come right off.

Mar 16, 2009 | 2001 Saturn SL

2 Answers

How do you remove the transmision valve body on 2001 saturn


You must remove the Trans pan, the valve body is inside the trans case under the pan, I would not suggest you do this job unless you have a high degree of technical skill, there are check balls and other factors that if not done right will cause the trans to not work properly.

Jul 28, 2008 | 1993 Saturn SL1

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...