SOURCE: SPARK PLUG INSTALLATION ON 2006 DODGE CHARGER 2.7L
In my experience with the 2.7L engine, the spark plugs are located on the top of the engine below the individual ignition coils. The coils are placed between the intake manifold and the valve covers, 3 per side. The coils are held in with "torx" screws. Simply remove the screws, and disconnect the connectors to remove the coils. The spark plugs will be underneath. Be sure to properly gap the spark plugs for maximum life and emissions compliance. Also, an improperly gapped plug can shorten the life of the coil packs.
Hope this helps!
SOURCE: seatbelt will not pull across,
Sounds as if the seatbelt locks have deployed you will have to buy new seatbelt and possibly a new SRS control module. Recommend contacting the dealer. Very costly repair.
410 views
Usually answered in minutes!
×