If it is the wiring, I do not see how to get to them.
Check the wiring connection behind the rear seat. Believe it runs up the left side. Check for power..
SOURCE: rear brakes on 1998 mercury sable
If it's anything like my old 93 Sable, you will have to disconnect the parking brake cable from the caliper before you can retract the piston. You should be able to do this with rudimentary tools - screwdriver, pliers. Also, the pistons on those type of calipers will NOT compress back into the cylinder. You will need to get a piston-retracting tool from your car parts store. These types of pistons need to be screwed back in by getting this tool and using a ratchet to press & turn at the same time. Have a swear jar and a few bandaids handy.
SOURCE: left rear turn signal and brake light dont work
You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.
SOURCE: 1998 Caravan gauges not working
Hay Guys I was rackin my Brain for 4 Weeks with my Van with the Same Problams and Crysler told me CLUSTER well Guess what I may be Female But I found the Problam and I have Fixed 8 Other Caravans it is the COMPUTER the Computer is havin Issues Now u can Go and Buy one BRAND NEW waste of Cash go to your Local Wreckers and get a Used one I did cost me 35 Bucks and My van is Like new I went threw the New Ground New Cluster and New Ignition WASTE OF CASH go buy your self a Used Computer from the Wreckers
Misteya
SOURCE: 98 Suburban Brake and hazard lights don't work
Check for power and ground at the two panel lights. GM uses a cheep circuit board design, they overheat and corrode on the other side of the board. not serviceable.
45 views
Usually answered in minutes!
×