Reset passenger side air bag on 2007 Avalon

Air Bag Light Flashing, How to diagnose and fix - YouTube

? 4:30
https://www.youtube.com/watch?v=FiO9wUb9FV4
Jan 21, 2014 - Uploaded by ChrisFix
Airbag light on or airbag light flashing? ... My 05 Elantra's air bag light flashes 5 or 6 times, then turns off and the Passenger Airbag Off light ...Missing: saturn ‎vue

50 Complaints: 2007 Saturn Vue Air Bags Problems

www.carcomplaints.com/Saturn/Vue/2007/seat...air_bags/air_bags.shtml
The 2007 Saturn Vue has 50 NHTSA complaints for the air bags at 63389 miles ... I started my car and the drive side air bag light came on no blinking just on.

There is no relay for the passenger side air bag . What seams to be the trouble ? There is possibly a code set in the air bag control module .
Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) The air bag supplemental restraint system (SRS) is designed to provide increased collision protection for front seat and second row outboard occupants, in addition to that provided by the 3-point safety belt system. Safety belt use is necessary to obtain the best occupant protection and to receive the full advantage of the SRS.
This vehicle line contains dual stage deployment (advanced restraint system) driver and front passenger air bag modules. These vehicles are also equipped with driver and front passenger safety belt retractor pretensioners. These vehicles can also be equipped with optional side air curtains that deploy from the A-pillar to the C-pillar upon a side impact. Vehicles with optional side air curtains are also equipped with seat side air bag modules in the front seats.
Side air curtains deploy from the headliner, protecting the first and second row outboard occupants during a side impact. Seat side air bag modules deploy from the outboard front seat backrest upon a side impact. In addition, a front impact severity sensor is mounted to the lower radiator support, a seat position sensor is mounted to the driver seat and a usage detection switch is added to the front driver and passenger outboard buckles. If equipped with optional side air curtain modules and seat side air bag modules, there are an additional 4 side impact sensors.
Vehicles are also equipped with an occupant classification sensor (OCS) system as part of the front passenger seat. The OCS system includes 2 OCS rails and an OCS module.
Passenger Air Bag Deactivation (PAD) Indicator
The passenger air bag deactivation (PAD) indicator is a visual indicator used to inform the front seat occupants of the passenger air bag deactivation state. The PAD indicator is a stand-alone lamp installed into the vehicle instrument panel in a position visible to each front seat occupant.
The restraints control module (RCM) controls the state of the PAD indicator through a direct hardwire connection, based on information provided by the occupant classification sensor (OCS) system. The PAD indicator is lit to indicate the passenger air bag module is disabled. An exemption to this is when the front passenger seat is determined to be empty and passenger safety belt buckle unbuckled, and therefore indication of a deactivated passenger air bag module is not necessary. In all other cases, the PAD indicator is unlit when the passenger air bag module is enabled.
When the ignition switch is in the ON position, the PAD indicator prove-out period is initiated by the RCM. The RCM briefly activates the PAD indicator to prove-out the indicator function and verify to the front occupants correct functional operation of the PAD indicator.
The PAD indicator will be lit/unlit within 1.0 to 1.5 seconds of a change of state from the OCS system.
When an OCS system fault is present, the RCM defaults the passenger air bag module to the last valid state received from the OCS system until the ignition switch is turned OFF. If the OCS system fault is still present when the ignition switch is turned ON, the RCM defaults the passenger air bag module to enabled regardless of the size of occupant in the front passenger seat. The PAD indicator will be unlit. For information on the OCS system, refer to Occupant Classification Sensor System in this section.
The following table indicates the passenger air bag status and the PAD indicator status based the size of the front outboard passenger occupant.

Likely has blend air door not working due to bad actutor or vacuum line leak (or bad check valve to vacuum reservior)

lost the operators guide?, Glove box?. get it and read the fuse page.
there are 2 fuse boxes. on in cab and one in engine bay.
here ill look in alldata.com see the fuse number.
bags are called SRS
your system is very complex and ties in to passenger classification controller, and you will never fix it guessing, if all fuses are good, it MUST BE scanned, and that is a special tool for bags.
there are 3 direct fuses, ECU-B, IGN, and GAUGE.
there are others, indirectly not checking all fues, missing the whole point, "the level of complexity
"
the main ECU might also report air bad failures, via can buss.
so scan the ecu, with any obd2 scan too. see what pops up
in FACT always do that for any issues, not solve by fixing blown fuses.
PCM/ECU,. BCM and PCC, and all brains in the car may report.
one most scan it to fix. it

First of all, air bag sensors are not under the seats, so don't worry. Next, the switch working at certain times means that perhaps you do not have to replace it. The cold switch contacts are slightly corroded from moisture condensing on them. When the car warms up, the contacts are "clean" and make good electric contact. Choose: live with a little inconvenience or start messing with the switch to clean off the electrical contacts inside with electrical contact cleaner which requires removing the switch and opening up its insides.

to reset any window open it half way down then
let it fully close and hold the button up for about 10 seconds. do this mithod to all auto windows encloding the sunroof . afterall try them from the driver side

try going to passenger door window switch and reset it by going down and holding for extra 3to5 seconds after window is down, do same to go up, then try doing it with master switch don forget to hold it longer, this is a reset also used on Scion vehicles, hope it helps.
Good luck

Your car has second generation airbags and it monitors weight in the passenger seat. If a child sits in the seat the computer looks at the weight and turns off the airbag so not to deploy in a crash. If you put anything in the seat like a purse or briefcase the computer will think its a baby and turn off the airbag.