At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The resistor is what controls the fan speeds. if this was helpful, please mark as helpful. Thanks!!The resistor is what controls the fan speeds. if this was helpful, please mark as helpful. Thanks!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is called a RDI.. Remove, dissemble and inspect. I did notice you have other codes. 1 of 8. Those other codes could be a problem with the 734 code. Year make and model helps...
well it's at alldata.com and at suzuki pitstop plus dot com.
here ill do that for you....
4 banger no displacement stated, now that is a challenge.
now the words..... USA car... 2.0L vin Z
Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B.
is this a hacking question?
did you ask the suzuki dealer yet..
is it legal to do ? in canada its not. so. no country stated.
btw, DRL electronics, works differently by each countries laws
governing this.
the 1millionth post , with no country, sigh.
welcome to the WWW, where are you , on the earth.
at least, point to a continent.
country works best. and if in Calif, that too is a country.
PR of Californica.
it will need service,
check pressures.
hot air as in heater on, so turn off the heater,
test in pure A/C mode Cold.
when both A/C and heat are on this is called defrost mode
which adds cold dry air to hot air and dehumidifes the hot air and window.
One of two things. Check the fuses. If not that, check the switch for low and high beams. Can not be the bulbs, but if a short is present, it could be also.
×