I need a wiring diagram for ignition switch on a 2006 Toyota corolla and how to replace a bad ignition switch

SOURCE: need wiring shematic for fog lights 2005 toyota corolla

im pretty sure these cars were already prewired for fog lights .there should be some plugs behind the bumper to fit them.if not get back i will explain how to wire them up.best of luck.

SOURCE: need belt schematic for 2006 toyota corolla

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

SOURCE: i need a wiring diagram for fog lights oem to my toyota

The link below is a Typical fog lamp / driving lamp hookup. Keep in mind that in most states, for these lamps to be 'legal' (and thus pass inspection), you must wire them such that:

1. You can cut them off (in other words, there must be a switch installed to turn them off)

and

2. They may only be operated with the low beams. (therefore, you must power your on/off switch from the low beam circuit)

http://www.accessconnect.com/fog_driving_lights_wiring.htm

SOURCE: How do I replace the fuel filter on my 2006 Toyota Corolla?

ITS A LIFETIME FILTER AND WITH REGULAR USE, SHOULD NEVER NEED TO BE REPLACED

SOURCE: need diagram for a serpentine belt of 2006 toyota corolla 1.8 wit

Is the diagram on a sticker, on the underside of the hood?