Question about Saturn SL2

Open Question

How to route serpentine belt without belt tensioer on 95 Saturn sl2 bolts broke

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 5 Answers

SOURCE: routing guide for serpentine belt

f35bdee.gifhope

Posted on Apr 25, 2009

Ad

bo manning

  • 290 Answers

SOURCE: need routing diagram for serpentine drive belt for

hesaturn_sl_00025010.gifre it is

Posted on Sep 08, 2009

Anonymous

  • 47 Answers

SOURCE: 1997 Saturn SL-2 DOHC cracked head?

not really your head holds alot of pressure any temp. fix will just break

Posted on Sep 26, 2009

techbuster

INDIRA KUMAR

  • 5081 Answers

SOURCE: How do I replace the serpentine belt on my 2002

Take off, or loosen the front half of the wheel well. There will be 3 screws (7mm) and two trim clips There are two clips on the plastic piece just under the belt. Take those out, and you will have full access to the belt and the tensioner. The tensioner nut (so to speak) is 9/16, and cannot be accessed with a socket. Must use a wrench with a long handle. At that point, hook the wrench to the nut and turn it clockwise to loosen. Remove the belt, and replace it with a new one

Posted on Nov 22, 2009

Testimonial: "."

jturcotte

Jeffrey Turcotte

  • 8984 Answers

SOURCE: I need a serpentine belt routing diagram for a

from autozone.com

3f85266.gif

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My serpentine belt broke and then my odometer does not work.


2002 L200 BROKE timing belt - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn L-Series > L-Series Tech

Sep 4, 2007 - 18 posts - ‎11 authors
2002 L200 BROKE timing belt L-Series Tech. ... This forum has been a huge help formy SL1, but it is a running machine. Question is for 2002, L200, which I .... I have the2000 Saturn LS with the V6. The owners manual says ... 2000 LW2 slipped timing belt-bent valves mystery!
6 posts
Oct 29, 2010
Changing the v6 serpentine belt
18 posts
Apr 5, 2009
serpentine belt tensioner warranty issue
7 posts
Feb 13, 2009
1997 Saturn SL2 Serpentine belt snapped?
12 posts
Jun 22, 2008
More results from www.saturnfans.com

Dec 05, 2015 | 2000 Saturn L-Series

1 Answer

Belt for saturn sl2 is it a serpentinw belt


Yes all of the Saturns used a V Ribbed Serpentine belt to drive the engine accessories.

Sep 11, 2011 | 1993 Saturn SL2

1 Answer

I have a 1990 supreme cutlass and i don't know how to change the serpentine belt. What do I do?



2.8L and 3.1L Air Pump Belt

  1. Disconnect the negative battery cable.
  2. Loosen the air pump.
  3. Remove the worn belt.

To install:
  1. Adjust the belt to specifications and tighten the pump mounting bolts.
  2. Connect the negative battery cable.

2.3L Power Steering Belt
  1. Disconnect the negative battery cable.
  2. Loosen the adjustment bolts.
  3. Remove the power steering belt from the pulley.

To install:
  1. Route the belt around the pulley.
  2. Adjust the belt to specifications, then tighten the adjustment bolts.
  3. Connect the negative battery cable.

See Figures 6 through 15

0900c15280067989.jpg

Fig. Fig. 6: Unfasten the retaining bolts...


0900c1528006798a.jpg

Fig. Fig. 7: ... then remove the serpentine belt guard


0900c1528006798b.jpg

Fig. Fig. 8: ...


0900c1528006798c.jpg

Fig. Fig. 9: ... then remove the serpentine belt

  1. Remove the belt. Clean the accessory drive belt surfaces.



0900c1528006798d.jpg

Fig. Fig. 10: Serpentine drive belt routing-2.2L engine


0900c1528006798e.jpg

Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine


0900c1528006798f.jpg

Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C


0900c15280067990.jpg

Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine


0900c15280067991.jpg

Fig. Fig. 14: in. breaker bar to rotate the tensioner


0900c15280067992.jpg

Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

Remove the belt guard or coolant recovery reservoir as required.



Dec 31, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Loose belt. how do you tighten it or repair it?


  • Open the hood to the Saturn SL and locate the serpentine belt routing diagram on the front engine frame rail. This diagram will show you where the tensioner pulley is in comparison to the others. You will need to refer to it to make sure the belt is aligned properly when it comes time to place the belt back on.
  • 2 Stand on the side of the right fender of the Saturn SL located in front of the belt and pulleys. Locate the tensioner pulley according to the belt routing diagram. Different applications of Saturn SLs (for example, with power steering and air conditioning or without power steering or air conditioning or any variety thereof) may place the automatic belt tensioner in slightly different locations. As you will note from the room between the engine and the interior fender well, you have an extremely limited amount of room to work. This is why the telescopic magnet will come in handy; you're going to drop a wrench and need to retrieve it from the bottom of the splash shield.
  • 3 Place the box end of the long-handled 14-mm wrench onto the center bolt of the automatic tensioner and turn it clockwise. This will relieve the tension on the belt. Take the belt off the upper-right hand pulley only (unless you're replacing the belt as well) toward the front of the car. Allow the tension to go back and remove the wrench.
  • 4 Slip the back of the serpentine belt off the tensioner. Locate the two bolts on the flange of the tensioner and remove them, using the ratchet and a deep socket. If you need more room to get to the bolts, you could remove the pulley wheel off the automatic belt tensioner by placing the 14-mm long-handled wrench back onto the center bolt of the pulley but turn counterclockwise and remove the bolt and pulley.
  • 5 Install the new belt tensionser, replace the bolts, threading them in by hand at first and then tightening with the ratchet and socket. This is going to be challenging due to the lack of room in the cavity you're working. Place the 14-mm wrench back onto the center bolt of the tensioner pulley and turn clockwise to release the tension and reapply the belt to the upper pulley and on top of the tensioner or replace the belt, according to the belt routing diagram.



  • Dec 10, 2010 | 1997 Saturn SL

    1 Answer

    95 chevy blazer V-6 vortec serpentine belt diagram


    35968c9.gif

    Drive belt routing-1994-95 4.3L, 5.0L and 5.7L engines, C/K series (without A.I.R.)




    ce473c9.gif

    Drive belt routing-1994-95 4.3L, 5.0L and 5.7L engines, C/K series (with A.I.R.)

    Sep 24, 2010 | Chevrolet Chevy Cars & Trucks

    2 Answers

    How do you get serpentine belt off?


    Hope this helps:

    Removal & Installation
    1. Remove the air cleaner outlet pipe.
    2. Rotate the drive belt tensioner clockwise and remove the drive belt.

    b7f605c.gif

    Rotate the drive belt tensioner clockwise and remove the drive belt



    To install:

    1. Installation is the reverse of the removal procedure. Make sure the belt is routed properly

    3e766f1.gif

    Accessory serpentine belt routing-Ford 4.6L, 5.4L, and 6.8L engines with A/C



    daf24f8.gif

    Accessory serpentine belt routing-Ford 4.6L, 5.4L, and 6.8L engines without A/C



    Please let me know if it's diesel because the routing is different.

    Sep 24, 2010 | 2002 Ford Expedition

    1 Answer

    How do I change serpertine drive belt on 2003 Saturn vue


    support the right side of the motor. remove the right side engine mount (5-7 bolts) using a socket wrench or serpentine belt wrench take tention off the tensioner while keeping tension off the tensioner remove the belt. NOTE: take notice of how the belt is routed.

    to install reverse remove steps

    Sep 10, 2010 | 2003 Saturn VUE

    1 Answer

    2003 Saturn vue serpentine belt route


    hi. the belt route map is usually on a sticker under the hood. It is also in the owner manual. Finally, NAPA stores have a data base of them and will gladly print one off for you. J.

    May 28, 2010 | 2000 Dodge Intrepid

    1 Answer

    Replace serpentine belt on 03 Saturn ion ? how do i release tensioner and where is it located


    for the most part there is a tensioer holding the belt on give these websites a try www.alldatadiy.com and www.autozone.com wish you the best of luck Michigan Man.

    Mar 08, 2010 | 2003 Saturn ION

    1 Answer

    1991 saturn sl2 water pump replacement


    well first you drain the coolant out at the low point on the radiator, that way it is saved if new. then you take off the right front wheel and remove the plastic access cover from behind the wheel to get to that side of the engine. then you take off the serpentine belt and etc. yes you can do this with the engine still in the car. you may want to consider replacing the serpentine belt and tensioner while you are in that area.

    Nov 02, 2009 | 1991 Saturn SL2

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    93 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    Marvin
    Marvin

    Level 3 Expert

    85222 Answers

    Jonah Oneal

    Level 3 Expert

    14092 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...