SOURCE: 2006 toyota corolla - rotors
The large bolt that you see is the nut that holds the axle shaft to the hub. You do not need to remove it to remove the rotors. You just need to remove the caliper & the caliper bracket. Normally, the rotors come off of the hubs easily, but sometimes, they rust onto the hub. My techs beat and beat and beat until they come off. With large hammers. Note that after they are beaten off, the rotors are no longer viable for re-use.
SOURCE: need belt schematic for 2006 toyota corolla
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
SOURCE: 2006 Toyota Corolla wont start
this sounds like the electric fuel pump in the fuel tank has failed, replace the pump and filter togeather.
SOURCE: removing door panel in 2000 toyota corolla
remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.
SOURCE: How do I replace the fuel filter on my 2006 Toyota Corolla?
ITS A LIFETIME FILTER AND WITH REGULAR USE, SHOULD NEVER NEED TO BE REPLACED
136 views
Usually answered in minutes!
×