SOURCE: Ford 460 Engine Temp sensor
looking at the front of the engine, just to the right and behind the distributor cap. You will see a wire attached (push on).
SOURCE: 2001 focus/ect sensor
its screwed into the cylinder head ,when you fit a new 1 dont overtighten it they sense temp of the head they dont screw into the water jacket!!!!!!!!!!!!!!!!!!!!
SOURCE: cant find 2002 ford focus speed sensor
I had a 2001 and the transmission was not shifting correctly that was diagnosed as a speed sensor issue.
There is a speed sensor on the transmission, near the rear.
And there is a speed sensor on one of the front wheel hubs...
Tell me what the problem is?
SOURCE: location of CHT sensor
It is located at the back of the passenger side cylinder head close to where the intake manifold and head meet.It will have a YE/LG and GY/RD wires to it.
SOURCE: need cylinder head gasket torque specs.
looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!
331 views
Usually answered in minutes!
×