SOURCE: remove master cylinder 1996 dodge caravan 2.4
disconnect brake lines from MC should be only 2. Remove the 2 nuts holding the MC on. replace in reverse order u will need to bench bleed the new MC and u will probaly need to bleed the brakes
SOURCE: 1988 Dodge Dakota brake line size question
they should be 3/16" but if you want to be sure, take a quarter inch wrench and put the open end over the line if it is sloppy on the line it is 3/16" , if it fits nicely, it is 1/4" . that is the only two sizes they could of used.
SOURCE: I am trying to change
Should be one line in from reservior and one out to brakes. The one out goes to a splitter for front and rear pipes. Follow that pipe. What are you taking it off for?
372 views
Usually answered in minutes!
×