Answer
pic
REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).
It is easier to remove/install sensor from under vehicle.
Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.
i have a 2004 jeep cherokee 4.0 new engine starts up wide open throtte
Mechanic shop kept vehicle for 2 weeks and could not find the problem. They cleaned the terminals at the battery and thought that was the problem. Jeep did the same thing yesterday, however, this time all of the gauge lights did not come on. Any ideas?
×