How do I get power steering fluid out of the master cylinder for the brakes on a 1992 Cadillac Eldorado

SOURCE: replace power steering pump and lines 1992 cadillac seville sts

you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck

SOURCE: 1992 YJ clutch fluid disapears.

It's probably your slave cylinder. On my '89 it was located in the clutch housing. You have to take the tranny off to get access to it. This is probably why the fluid is "disappearing." I'd suggest changing the clutch while you're at. They sell kits for this at auto parts stores.

SOURCE: 1999 Subaru Brake problem-master cylinder/power booster?

Hi there. If you have determined that the brake system doesnt have any leaks in the lines or at the calipers or brake cylinders, I would start by checking for vaccum to the brake booster first. There should be a large vaccum hose going from the power booster down to the top back of the engine. If this got unhooked or broken, your brakes will feel like old manual brakes rather than power. Make sure you have good suction by unhooking one end of this line with the engine running and place your hand over it to see if it has suction. GT would be the sporty version of the car and usualy has an emblem either on the fender or rear bumper saying GT. If you dont see this you probably have the L series.

SOURCE: 2001 dodge 2500 diesel, leaking

YES.BUT IT IS EASIER AND LESS TIME CONSUMING TO BUY A REBUILT UNIT.

SOURCE: leeking master cylinder vw trasporter t4 2001

Hi,

The leak is only a symtom the real problem is the pedal box! it will have broken!

put your head in the footwell, press the pedal by hand while watching the master cylinder.

If you can see ANY movement of the master cylinder then the mounting has failed!

Hope that helps