SOURCE: no power from fuse to fuel pump
fuel pump works fine but gage isn't working any one got any idea?
SOURCE: my avenger cuts off after being driven for at least 5-30 minutes
a very common problem with these cars is the crankshaft position sensor. also camshaft position sensor. they will make the car do exactly what you described. let me know what you find
SOURCE: My 1997 Dodge Avenger's engine won't start
Try cam and/or crank sensor. If crank to cam timing isn't detected properly it'll crank all day but won't start. I had similar problem on my 2.5L V6 Avenger....drove home fine, no engine light, next morning it cranked, but wouldn't start. The crank sensor was faulty.
SOURCE: 1990 Dodge D150 5.2 Will not start
hook up a gas pressure gauge to the schrader valve. should be 50-60psi. If it doesnt have any, check relays, fuses. When you replaced the fuel pump you should have checked for 12V to the pump to confirm it was bad. I am assuming you did this. If not its worth checking again. If you dont have 12v its probably a fuse, relay, or wiring problem. Possibly bad ground?
SOURCE: Car turns over but wont start
go back to basics ,is their fuel to injectors and a spark on a spark plug
99 views
Usually answered in minutes!
×