SOURCE: horn location 1996 ford explorer xlt
your horn has also has a fuse so just change that and you should be fine and that is located under thew stearing wheel and it is the 2nd one to the right and it is a 30A
SOURCE: 2002 Ford Exlorer XLT
That year Explorer was notorius for rear ABS sensors going bad. If your ABS light is on as well this may be your problem. Also they were notorious for 4WD modules going bad. This problem is more expensive. I would advise you to have it checked on a computer to see what codes you have.
SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and
I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.
SOURCE: 1996 Ford Explorer XLT abs light comes on on
The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......
SOURCE: 2007 FORD EXPLORER XLT
need to set tires at correct pressure you can find a sticker on the inside of drivers door to tell you the correct pressure after you do that it sould reset the light after you drive
39 views
Usually answered in minutes!
×