Question about 2003 Honda Pilot

1 Answer

Rear door won't unlock 2000 Honda Accord

Button operates normally manually, remotly and with key but door remains locked its really buging my aunt can anybody help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.
    Hot-Shot:

    An expert who has answered 20 questions.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Door lock actuator--- if none of the power controlls work

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

My 2008 Accord EX Factory Alarm / Remote Key?

Jan 20, 2017 | 2008 Honda Accord

1 Answer

Programming a honda transponder key
did some quick research for you and found this easy and very clear step by step instructions on how to program your transponder car key to your vehicle.. this works for the following models though :

Accord 2003 to 2006

Civic 1999 to 2006

Element 2003 to 2006

Odyssey 1999 to 2006

Prelude1999 to 2001

Accord SE 1997

CR-V 1998 to 2006

Insight 2000 to 2006

Pilot 2002 to 2006



now here are the steps:


  1. Turn the ignition on
  2. Press Lock/Unlock within 4 seconds
  3. Turn ignition off and hen back on within 8 seconds
  4. Repeat steps 2-3 two times
  5. Press Lock/Unlock again within 4 seconds. The system should now lock and unlock the vehicle to indicate it is in programming mode.
  6. In the next 10 seconds: press Lock/Unlock button allowing the doors to lock/unlock once; then press lock/unlock button of each remaining key, allowing the doors to lock/unlock once.
  7. Switch ignition off and then remove the key


Civic 1996-1998

  1. Turn ignition on
  2. Press and hold the valet button which is situated on the radio within 5 seconds.
  3. System should now lock and unlock the vehicle indicating it is in the programming mode
  4. Within 5 seconds turn ignition OFF and press Lock/unlock on the remote fob to be programmed
  5. Within the next 10 seconds, press Lock or Unlock of any remaining keys, allowing the doors o lock or unlock once.
  6. Release valet key
  7. Switch ignition off and then remove the key


Radio remotes 2 and 3 button types

  1. Switch ignition on and repeat for 3 times.
  2. Press he lock button, switch the ignition off and back on and then press lock button again.
  3. System should now lock or unlock
  4. Press the lock button of all remotes to be coded. The car should acknowledge this by locking/unlocking each time
  5. Switch ignition off to exit the programming mode.


If you will have any further doubts or question to ask i suggest you to check out the page where i found this which is http://www.carkeyadvice.com/step-by-step-fob-programming-guides/honda :) i hope this was the solution you were looking for mate! happy happy new year!

Dec 30, 2012 | 2007 Honda Pilot

1 Answer

I just changed the battery in my 2002 honda accord and now the alarm keeps going off. i did what the manual told me to about putting the ignition key in the door and unlock it then lock it back then unlock...
The remote has lost the ability to communicate with car. Put the key on the ignition, press on the remote (button for unlocking) and dont let go, turn the ignition to the #2 position (radio on) and you should see the key emoticon flashing in the dashboard, then let go of the remote button. repeat operation just to make sure. If you have a spare remote, do the same. This applies to the PRESTIGE alarm system, will probably work on superlock too, if your Accord has that option.

Oct 16, 2010 | 2002 Honda Accord

1 Answer

Where is the re-set button to program a remote door lock for my 2000 Subaru Forester?
Obtain all keys/remote controls. Remove driver's side kick panel/lower 'A' pillar trim. Connect central locking registration connectors (white) - black wire and black/blue wire Fig. 2 . Unlock the vehicle using the key. Program first key/remote control as follows: Press unlock button Fig. 1 [1], then lock button [2]. The door lock should lock and unlock in sequence confirming programming of first key/remote control. Repeat programming procedure for remaining key(s)/remote control(s). Once the last key/remote control is programmed disconnect central locking registration connectors. Check operation of all programmed keys/remote controls.

Sep 03, 2010 | 2000 Subaru Forester

1 Answer

I have a 2004 Honda Accord EX. Key Fob works trunk but not doors
Programming
When
Key added or replaced. System malfunction.
How
Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys.
NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.

Jan 25, 2010 | 2004 Honda Accord

1 Answer

2005 accord drivers door lock no longer works electronically. I have to use the key to unlock the door, and physically push down the knob to lock the door. This prevents the remote from unlocking the other...
Sounds to me like perhaps there's an electrical issue going on here. You will probably need to take it to a mechanic or dealer to get fixed. I mean, if both the remote and the buttons fail to lock/unlock, it really sounds like an electrical issue.
Do any of the buttons work on any of the doors? If so, it may just be the driver's door that has a problem.

Jun 25, 2009 | 2005 Honda Accord

1 Answer

Can't lock my Honda Accord as alarm goes off when locked
if you have a valet key, stick it it on the passenger side when unlocking door, so it wont alarm while you open the door hope that helps

May 17, 2009 | 1998 Honda Accord

1 Answer

How to program a 2009 Honnda Accord Key Remote
Want to programs the remote key of your Honda cars, then you must reprogram all of the key-less remotes of your Honda Accord once you are in the programming mode. You must complete each step quickly so to prevent the system from exiting the programming mode.

Note: Maximum Three remote transmitters can be programmed.

Make sure all the doors are UNLOCKED before starting this programming procedure.
1. Turn ignition switch to ON (II)
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn ignition switch to ACCESSORY (I) or LOCK (O)
4. Turn ignition switch to ON (II)
5. Press the LOCK or UNLOCK button on one of the remotes.
6. Turn ignition switch to ACCESSORY (I) or LOCK (O)
7. Turn ignition switch to ON (II)
8. Press the LOCK or UNLOCK button on one of the remotes.
9. Turn ignition switch to ACCESSORY (I) or LOCK (O)
10. Turn ignition switch to ON (II)
11. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
12.Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
13.Turn the ignition switch to LOCK (O) to exit programming mode.
14. Test remote(s)

For more clarification, i have also shared the video to do this process, Have a look

Apr 09, 2009 | 2009 Honda Accord

1 Answer

Door lock
You have a bad Driver's door lock actuator.

Jul 23, 2008 | 1998 Honda Accord

4 Answers

Battery died now power sliding doors and rear hatch not operating
1) Unlock all doors from driver's door while it is open. The driver's door is the only door to remain open during this process! 2) Turn the key from OFF to RUN 8 times within 10 seconds, with the eighth turn ending in RUN. All the doors will lock and unlock if program is successful. 3) Turn key OFF and remove key from ignition. Within 20 seconds, press any button on the remote. (Press sliding door or rear hatch and it will open!) 4) If door locks do not respond, wait several seconds and press button again. If doors still fail to respond, try repeating steps (1-3).

Jun 16, 2008 | 2005 Ford Freestar

Not finding what you are looking for?

View Most Popular

2003 Pilot

  • Cars & Trucks

Related Question

My 2008 Accord EX Factory Alarm / Remote Key?

  • 2008 Honda Accord

Open Questions:

0 Answers

Entire Dash blinks, engine starts, and all eletrical/power work fine. Trailer lights will not come on. I attempted to tow my trailer this evening, but found that my wiring harness had a split wire for the right trailer tail light. Purchased a new harness and attached it. Upon turning on the pilot lights, the dash starting blinking. I have no lights to the trailer now with a new wiring harness. Checked connections of the harness; secure and tight fit.

Mar 19, 2015 | 2003 Honda Pilot

0 Answers

lumiere sur un 2003 honda pilot flash

Feb 24, 2015 | 2003 Honda Pilot

0 Answers

where is the remote reciever on a 2003 pilot

Aug 23, 2014 | 2003 Honda Pilot

0 Answers

my 2003 honda pilot tailgate lock is loose and will not engage

Aug 22, 2014 | 2003 Honda Pilot

See all 2003 Honda Pilot Questions

Related Topics

2003 Honda Pilot Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1 Answer
What does the warning light of a yellow triangle

2005 Honda Pilot

2 Answers
Trouble code 84-1 sensor logic failure

2006 Honda Pilot

3 Answers
VTM-4 indicator light comes on

2005 Honda Pilot

1 Answer
What does the b14 maintenance

2007 Honda Pilot

5 Answers
My radio in my 05' Honda pilot stopped working.

2005 Honda Pilot

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2003 Pilot Manual

2003 Pilot

Loading...