SOURCE: how can I bypass the car alarm ignition switch
Here is a great write-up on the subject. This will get rid of the entire VATS system. It was the only thing that saved my 94 Park Avenue. http://newrockies.com/vatsbypass
SOURCE: Factory alarm has cut off the motor
Order and program a new remote.http://www.programyourremote.com/
SOURCE: MY CAR WONT START BECAUSE IN AFTER MARKET ALARM.
I've ran into this problem myself, if you're not confident with doing some wiring you probably should not be doing this. This will probably take 1 to 3 hours to do this. If you can get a wiring diagram that showed how the alarm was originally installed. If not find the alarm probably underneath the dashboard, the alarm wires will problem be smaller than a wiring that is in your car. When removing the alarm think of it as this way, someone cut into the middle of your wiring harness and put a alarm in. Would you need to do is remove the alarm and splice the cut wires back together. Instead of removing the alarm all at once try disconnecting one wire in a time and finding its mate. The wires or color coded. For example, black with an orange tracer. This would mean it's a black wire with an orange line on it. If you're not sure look at a wiring diagram splicing the wrong wires together could cause your car not to function properly or damage it. Before you start this make sure you disconnect the battery also. Good luck.
I found an answer on show. RESET ANTI THEFT 1995 JEEP
89 views
Usually answered in minutes!
×