SOURCE: the nipple on the heater core that connact the
Unfortunately the heater core must be replaced because the nipple is soldered to the heater core and access to the core for resoldering is not possible unless the heater core is remove and so if you go to that kind of trouble you should just replace the core with a new one rather than doing the repair and risking a future leak after reinstalling.
Testimonial: "yes it was helpful . but have other question.what is the white plactic that is covering the pipe that come out of the heater core"
SOURCE: Male fitting on heater core inlet broke off in hose
RKmastertech is incorrect. That plastic fitting is seperate from the aluminum heater core and can be removed by means of a special quick disconnect tool, like OTC 6046. Rock auto has the fitting for $5 plus shipping, just for a reference.
Testimonial: "Thanks! You were right. Saved me some money."
SOURCE: 1999 Chev Venture Heater core do I need to remove
The blower motor location can change from year-to-year. It can also change with the trim level of the vehicle. A vehicle that has front and rear climate controls may be configured differently than a vehicle that has front controls only. The following are two different repair procedures. One is for blower motors located and accessed in the engine compartment, the other is for blower motors mounted inside the vehicle.
REMOVAL AND INSTALLATION
Engine Compartment Mounted
Testimonial: "very helpfull thanks!"
73 views
Usually answered in minutes!
×