SOURCE: Acura Legend Sedan 3.2 lts 1994
replace de ignition module first.. if still wont start good chances is the crank sensor is located behind the timing belt.. my 94 legend use to do the same thing until i replace the crank sensor.. and also if u can afford i will suggest u to replace the main fuel relay too... all this is after u are 100 pcnt sure that ur fuel pump is working....
SOURCE: I need unlock code for 1994 acura legend with bose radio serial n
What you need to do is pull your radio and get serial number and model number. If you call the dealer with this info and can prove you are owner they will give you the code usually for free.. If you go to dealer and they take it out they will charge you around $90...You might get lucky sometimes the dealership puts the sticker on the door jam by the mfr sticker itr is a 5 digit code... Good Luck
SOURCE: wipers stopped working, but can still hear the
Hey,
The earing that connects the wiper arm to the motor is ground down. You need to replace the wiper arms or the motor depending on which "gears" are ground down. The wiper motor is here:
http://www2.partstrain.com/store/?Ntt=Windshield&N=1684%2011369%204294965613
Wiper arm here:
http://www2.partstrain.com/store/?Ntt=wiper+arm&N=1684%2B11369%2B4294965613
Hope this helps!
Mike
SOURCE: where is plug for check engine light? 1994 acura Legend
IT IS LOCATED BEHIND THE GLOVEBOX. JUMP THE CONNECTOR AND COUNT THE FLASHES OF THE CHECK ENGINE LIGHT. HOPE THIS HELPS, LET ME KNOW. BEST OF LUCK TO YOU.
SOURCE: 1994 Acura Legend check engine light is on. When
turn the ignition key to the acc or lock position with the odometer reading showing.
while holding the trip/reset button turn the ignition to the on position. light should flash and go out!
reset done. if you have any more issues plese ask. good luck
59 views
Usually answered in minutes!
×