Can I get a spark plug wiring diagram for a 1998 land rover range rover 4.0 V8? I can't find anything by googling it..

See this

Fuel pump dies around 130k.

1. Disconnect battery, neg lead, you must wait 2 minutes after car is turned off before doing so, 2. Remove ignition coil pack from spark plug 3. Remove plug, 4. Gap new plugs, torque to 23 ft/lbs 5. Refit ignition coils 6. Reconnect battery neg lead

land rover discovery v8i 3.9 1995

hi i have just had he same problem with my V8 p38 try cheaking your crank shaft senser we have just taken ours out and cleaned it up with carb cleaner and it works fine

If you have not removed any wiring yet,why not draw one out for your use ! You can number the wires,or tape them with masking tape then mark them,and to the cylinders, in order of firing or in front to rear on one bank left or right and to the coil towers with a white marker.or a card board template with numbered positions for the wires to hook up to the correct towers. Or just change them one at a time.

1999 Land Rover 4.6 liter V-8




Hope this help (remember comment and rated this).

Download a copy of the RAVE CD for the Range Rover P38. It has the Electrical Troubleshooting Manual (ETM) with the wiring diagrams. Try here: http://green-oval.com/joomla/index.php?option=com_docman&task=cat_view&gid=13&Itemid=29 - scroll down and select RAVE CD2

This is your best choice.Here is a diagram attached.