2006 Jeep Grand Cherokee Logo

Related Topics:

J
James Wright Posted on Nov 23, 2016

Where is the thermostat located on a 2006 grand cherokee v8

5 Related Answers

Anonymous

  • 94 Answers
  • Posted on Mar 10, 2009

SOURCE: Spark plug location

this has coil over plug (c.o.p.) ignition.you do have to pull the 8 coils to get to the plugs.

Ad

Anonymous

  • 36 Answers
  • Posted on Oct 08, 2009

SOURCE: Where is a cabin air filter located on a 2006 jeep

inside the glove box

Anonymous

  • 6982 Answers
  • Posted on Feb 19, 2010

SOURCE: Where is the camshaft sensor located on my 99 Jeep Grand Cherokee

If you still have a cap rotor and ignition wires, it's inside the distributor. If not, it is the part where the distributor used to be (center rear of the engine behind the intake manifold)

Anonymous

  • 79 Answers
  • Posted on Jun 25, 2010

SOURCE: Where is the thermostat located on the engine of a

Lower right (pass) side of engine. Lower hose goes to it, and held on by two bolts. You can see it from the top

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jul 21, 2010

SOURCE: location of cam sensor 2003 jeep grand cherokee v8

Answer
pic_12.gif
pic
REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).

It is easier to remove/install sensor from under vehicle.

Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.


9347d80.gif

Testimonial: "that is just what i needed thanks"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Pontiac Grand Prix V8, 5.3. Crank position sensor location please.

Question edited for clarity, things in the right order.
Question moved to year make model category.

Videos and diagrams in the link.

https://www.google.com/search?q=2006+Pontiac+Grand+Prix+V8%2C+5.3.+Crank+position+sensor+location

..
0helpful
2answers

Where is the thermostat on a 1996 jeep grand cherokee limited, with a V8

At the radiator, locate the large upper hose. Follow it to the engine. Where it connects to the engine, that is the thermostat housing.
0helpful
1answer

Gear box oil for 2006 grand cherokee laredo v8 47l

which box,
A/T box
M/T box
transfer case box
RTM?
06 gc. gen3 WK car.
the fsm full is here free.
http://colorado4wheel.com/manuals/Jeep/WK/WK%20FSM/

read that, its all there, DL it while still free.
0helpful
1answer

Changing the fuel filter on a Jeep Grand Cherokee

most 2004-2007 Cherokees v6 and v8 models only had a strainer on the fuel pump jeep does make a replacement fuels line assembly with a fuel filter
1helpful
1answer

Where is thermostat located on a 2000 Jeep Grand Cherokee Limited V8 ? Thanks

Locate the top radiator hose...follow it down to the motor...the housing that the hose connects to is where the thermostat is..usually there are 2 screws to remove and then it just comes up and the thermostat is inside
3helpful
1answer

I'm trying to locate the thermostat on my 2000 jeep grand cherokee

  1. On 2000 Jeep Grand Cherokee 4.7L V8
  2. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  3. Remove thermostat housing mounting bolts, thermostat housing and thermostat.

2000 Jeep Grand Cherokee 4.0l v6
Note:on the In-line 6 4.0L model the thermostat housing is mounted at the top of the engine block next to the water pump.
2helpful
1answer

Location of coolant sensor for 97 Jeep Grand Cherokee v8

in the 5.2L V8 engine the coolant sensor is located on top of the engine. Locate the coolant thick hose coming from top of the ratiator to the top of the engine. Look at the place such hose connects to the engine you wont miss the sensor it is about one inch from there.
7helpful
2answers

Changing a starter on 2006 jeep grand cherokee 6cyl. 4x4, how hard is it, it in a tight location, any tips

On the straight six it should not be too difficult. It is on the passenger side of the engine on the back. There are two bolts that go straight up into the housing that hold the starter on. Then you have the wires going to the starter itself. I believe there are some shims between the starter and the housing, make sure you don't lose those. It is kinda a rough job laying on the ground, but entirely possible in about 45 minutes depending on your level of patience :)
0helpful
1answer

I need to know the location of the Thermostat on my 1996 Jeep Grand Cherokee,

If you have a V8 the thermostat is located under the coolant inlet tube. The tube is located on top of the engine, in the front about center. The thermostat is hard to change. Locate the upper radiator hose on your radiator and follow it to the engine block it is located on the top front part of your engine and you must lean over the front and look down onto the block to see the thermostat housing.
Not finding what you are looking for?

822 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...