At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I know how to get them out and put them back ! I want to take the lens cover off so that I can put LED strip lights insideI know how to get them out and put them back ! I want to take the lens cover off so that I can put LED strip lights inside
sorry but i have a look around the internet and i can not find anything apart from some people are saying the lens should just pull of as they are only held on by clips.i am not saying to do this.sorry but i have a look around the internet and i can not find anything apart from some people are saying the lens should just pull of as they are only held on by clips.i am not saying to do this.
lol.your welcome and i hope you get it sorted,i will keep looking around and if i find anything i will post it to you.lol.your welcome and i hope you get it sorted,i will keep looking around and if i find anything i will post it to you.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are some quick tips and instructions on how to install an aftermarket HIDConversion kit into an aftermarket projector headlight assembly. ... Aftermarket projector headlights look almost like an OEM headlight with the exception of the wiring and design. You would need to remove ...
images for Replacing halo and hid lighting in an ...
I would clean the lens first and make sure they are aimed correctly. The headlamp in those is plenty bright. Period. Led's are just going to freak out the electrical system.
INSTALLATION GUIDE:
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Parts Identification:
Projector Headlight
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
TOOLS REQUIRE
10mm - 8mm socket
Philip Screwdriver
Crimper/Pliers
For more information about how to install your vehicle, come visit our youtube page on
http://www.youtube.com/spyderauto
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
STEP:
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
STEP:
pls vote an diam giving you link also for better help BMW e46 HID Headlight Replace
Remove the 2 parking light housing retaining screws ...
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb
Remove the screws from the lens and separate the lens from the headlight bezel.
Remove the headlight bezel.
Remove the screws from the turn signal housing and pull it out.
Turn the bulb socket counterclockwise 1/3 turn and remove it.
Remove screws for lens. You may have to access them from inside the hatch. Then pull out lens, then turn and pull out bulb and socket, Push and turn then pull bulb out.
×