SOURCE: Transmission Not Going into Overdrive
First check and make sure the fluid is full. The most likely cause is a failed solenoid pack. Circuit codes normally mean something electrical not mechanical has failed. The solenoid pack is on the outside of trans pretty easy to replace.
SOURCE: 1999 ford explorer 4.0
If it saying any of your bank are running lean (according to codes), try cleaning your EGR Valve or completly replacing it
SOURCE: My P0745 code: My 2002 ford explorer has a problem
Some 2002 Explorer/Mountaineer vehicles built prior to 3/4/2002 with 5R55W transmission, may exhibit no 3rd gear or slipping 2-3 shift with diagnostic trouble codes (DTCs) P0733 and P0745 present. This may be due to a broken intermediate band.
ACTION
If the conditions described are verified:
^ Follow Service Procedure "A" to confirm band is broken.
^ Follow Service Procedure "B" after verifying a band is broken.
Per Procedure "B", if a broken band is found replacement of both the OD and intermediate bands and pistons will be necessary. However, only an inspection of the direct clutch drum may be necessary. The drum should not be replaced unless damage is found.
SOURCE: po700 trans error po732 gear 2 ratio incorrect
dodges do not have a strong transmission, I would be checking salvage yards for a replacement.
118 views
Usually answered in minutes!
×