Do you have a video on how to remove a starter from a suzuki xl7 2003?

What does having a key have to do with removing the starter motor??

With brute force

bat neg lug off.
gain access to starter, front in jack stands really help.
then remove all wires to starter
then any heat shields blocking access to it's mounting bolts.
then remove the 2 mounting bolts.
duck as it falls.
'

same as all cars made.
posted over 100 times.
ever youtube this, 10,000 examples on that. endless.
1: disconnect battery neg lug, first, or boom eat acid.
2: gain access to the starter. jack stand the front.
3: remove any shields covering starter , Ill assume you know where starters hide, the are at the flywheel (engine /trans juncture)
4: remove all wires, from starter.
5: remove the mounting bolts to starter.
6: it falls, you duck.

reverse above, for back, cept duck.

one of the hardest starters to remove
only held on by two bolts but not enough room to remove it
without taking a lot of parts off

will be best to buy a 2006-2014 vitara repair manual

see if the exhaust manifold removal makes it possible
or the engine mount bracket

this is the 2008 starter




this is what it looks like on a 2003 vitara engine


worth joining this 2006-2014 vitara forum

3G 2006 2014 Vitara Grand Vitara Suzuki Forums Suzuki Forum Site

no year. stated.
turns means ZERO!
is the starter silent? yes/no.?
does a charged battery work?
are the battery lugs cleansed.
did you try to hot wire the starter proving its bad.?
did you jumper cable start car? AAA tow style.?


the FSM book is 4 bucks (posted 100s of times)[

turn to chapter Starter
https://suzukipitstopplus.com/Products/1066-2006-forenza-reno-service-manual.aspx

i guessed 2006 for you.

or search with youtube, see 1000s do same thing.

same as all cars. (99%), il quote your FSM book. factory service manual.

1. remove battery neg lug.,
2. remove all cables and wires to starter (solenoid)
3. remove the starter bolts, it falls out.

to install, reverse above.

same as all cars
1: battery neg lug removed, tied back. (or boom happens)
2: remove all wires to starter, solenoid.and starter.
3: unbolt starter (nuts and bolts on base)
4: starter falls to earth.
reverse above to replace.

Check battery and connection.

Disconnect negative terminal of battery.
Remove positive lead from starter solenoid.
Remove the solenoid wire (brown).
Remove two bolts holding starter to bellhousing.
Lift starter out.