What wires do I join in my nc ford fairlane on the back of the ignition plug to start it I have the key and immobilizer but the ignition is broken

You can't. You are trying to do exactly what the system is there to prevent. You have to fix it it, not find a way around it.

https://www.fixya.com/cars/r26142776-want_bypass_vehicle_security_system

//

Would you mind posting a detailed question like what year the car is and engine size what does NC mean? If this is a old Fairlane it's bolted to the timing cover on the left side but if your in a different country then the U.S.A. THERE ARE DIFFERENT MODELS AND YEARS OF THE VEHICLE PLEASE SPECIFY WHAT YOU HAVE AND WHERE YOU ARE OK IT'S IMPORTANT TO HELP YOU SOLVE YOUR QUESTION

not sure where you are in australia,but call me tomorrow on 0424 362 358 and i'll fax it to you

to disable it is easy depends on where it is..

to locate it contact your local dealer they should tell you the exact location of it, once its external and not built into the CPU..

once you have the location *usually under the dashboard), simply unplug the wires connecting to it..

that's it.

i have a volvo s40 madel 2008 the chip is broken but key is ok now my question is can i bay pas the engine to start the car?

Nc fairlane v8 fuel relay is under the header tank green is fuel pump relay and brown is for ecu

"Security" or Key-shaped light flashes on the dashboard ? Your car might be equipped with an immobilizer. (you can find more information about the immobilizer in your owner's manual). The immobilizer allows the engine to run only if the correct key is used. If your car has an immobilizer, you probably see a "Security" or Key-shaped light coming on on the dashboard every time you turn the ignition ON. If this light is flashing when you turn the ignition ON, it could mean that there is some problem with an immobilizer or the system does not recognize the key. If the immobilizer doesn't recognize the key, the engine wold not start at all, or would start and then die in few seconds.
You can try a spare key, if it won't work, your dealer is the place to call. Sometimes, the key is just need to be reprogrammed.
R

More likely to be the Neutral safety stitch out of adjustment.

Moving the E-Brake only slightly moves the Shifter handle at the same time.

Try moving to Neutral then starting the vehicle.

Hope this tip helps.

r/
David