How do I get a key cut for my vectra 2000 have lost both keys..

Unfortunately you won't get that information here. Change your Auto Locksmith or head to the dealership. All new cars have three keys, you replace as soon as you get to one left.

Locksmiths normally have paid access to that information. The code tells them the settings for the key cutting machine.

Use the door lock if it's the same

You will have to get a key kit by a professional

if you had the keys there are several places to get one cut, but as youve lost them only the main dealer would have the right key for that model.

if you lost all keys to vehicle ,,either contact dealer, they can cut keys from vin number,,also a cert.locksmith can make keys for vehicle...

take vin to a dealer and they will order one up.you could take it to a key specialist for one to be cut but....you would still have to go to a dealer for the keys (all)to be coded to the car if you have transponder type.....

You have to go to dealership with proof of ownership and vin # and thy will cut u a key

Take you ID, and your title or registration to your local ford dealer; they will cut you set of keys. It will cost you about $100.00 for the set, but a locksmith won't do it any cheaper for you either.

The only 2 options you have at this point are as follows, Hope to some higher power you find the key, or take it to the dealer and have a new key cut and chipped, im sure that it has a securilock system, that makes it tough, Although the key itself isnt very expensive, you have to have a key cut by code, There is a special code designated to your key that can be looked up by the vin number of the vehicle and can be cut and programed that way.

If you have lost all keys, you must see a Toyota dealership to have them reseed the immobilizer and cut a new key or keys. They shouldnt charge you more than 2-2.5 hours labor plus the cost of keys. I do these all the time