SOURCE: Check engine light on, traction control disabled
disc connect battery for 15 min. see if that will reboot cpu
SOURCE: My 1999 vett got wet
Hello my name is Ben. Those are both throttle position sensor codes. Considering that you said it got wet, there may be some water hidden in the connectors of the Throttle Actuator Control module. There is an access panel in the passenger front wheel well. I would remove that panel and check the connectors on the module. They must be clean, dry and tight. While you are there examine all the wiring. Also, pull the passenger's side floor mat and feel for wetness, then check the passenger's fuse box behind that little piece of carpet for water infiltration. Hope this helps, Ben.
SOURCE: Check engine light on, traction control disabled
i i have the samething here just reset the computer and the engine sign should go away its with the tc theres something wrong with it and it makes the computer seperate some part or disable which the transmission cannot work properly and the sign comes up for both
i learend ffrom sources from the internet.
SOURCE: SERVICE AIR BAG LIGHT STAYS ON AND REDUCED ENGINE
It will be more help full if you can provide the trouble codes.
SOURCE: Traction control light on and engine power reduced
you could have a stuck switch .....check your traction control switch on your dashboard....engage and disengage it , while paying attention to the rpms...notice any change...if you do notice a change, then replace the switch....if no change, it is probably on the trans itself and should not be a dealer only fix....your local reliable trans shop should be able to fix you up without emptying your entire wallet.
?€¢
Limited throttle mode--The control module will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.
?€¢
Throttle default mode--The control module will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.
?€¢
Forced idle mode--The control module will perform the following actions:
-
Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off.
-
Ignore accelerator pedal input.
?€¢
Engine shutdown mode--The control module will disable fuel and de-energize the throttle actuator.
Refer to
?€¢
Powertrain Control Module Description for the 4.8L, 5.3L and 6.0L engine
397 views
Usually answered in minutes!
×