Question about 2007 Chevrolet Impala

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 15,575 Answers

CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).

  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Posted on Oct 02, 2016

Ad

2 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

martens_five

  • 2 Answers

SOURCE: My 2006 chevy impala dash

This is the Compas reading, In your manual you will see what geographic zone you are in. follow the instructions. enter the zone drive in a circle and the compass will set itself correctly.

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 impala died at stop light wouldn't start right away but then did restart. engine light stayed on


You need to get the fault codes read to get the different faults and search what the codes mean to get a suggestion of where to look as sometimes the fault is upstream of the failed component

Jan 11, 2017 | 2007 Chevrolet Impala

2 Answers

What does calibration complete on a 2007 Chevy Monte Carlo mean


When battery is disconnected for some period of time, ECU must re-learn settings for your engine. The message may mean that procedure has completed.

Aug 03, 2015 | Cars & Trucks

1 Answer

How can i release a torque lock on a 2007 Impala?


What is a torque lock? Do you mean a Locked Torque converter in the transmission?
Reading the stored computer trouble codes will tell you if the overdrive is failing. Go to AutoZOne or some such place and have the diagnostic scan to see what codes are set.
You CAN unplug the lock-up torque converter solenoid. I have on a Buick but cannot guarantee this will create more problems BUT it worked for me...

May 27, 2015 | 2007 Chevrolet Impala

2 Answers

Calibration complete going on my dash I got a 2007 impala


Someone probably forgot to finish the calibration with their scanner. If the car runs fine and everything works, I wouldn't worry too much. If the light is annoying, you will most likely have to pay someone to complete the job.

Oct 22, 2014 | 2007 Chevrolet Impala

1 Answer

What does it mean when the message "STOP ENGINE, Oil pressure low on a 2007 impala


it means the oil pressure is low and may be low enough to damage the engine if you keep drving/running the engine. it would help if you could tell us the actual oil pressure, engine and mileage . basically, the oil pressure may be low enough to wreck your engine, then again it may be bs......

Mar 30, 2013 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Outside temperature reading -40 and outside temperature sensor has been replaced


had the same problem, it needs time to calibrate, you have to drive it over 19 miles per hour for at least 10 minutes or so and it should reset itself. I would just take it on a drive if you haven't done so yet.

May 30, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

My 2006 chevy impala dash board read out: calibration complete what does this mean and how would I go about fixing it


This is the Compas reading, In your manual you will see what geographic zone you are in. follow the instructions. enter the zone drive in a circle and the compass will set itself correctly.

Dec 04, 2010 | 2006 Chevrolet Impala

2 Answers

My service traction control light keeps on going on it then reduces my power engine in my 06 impala


I have a 2006 checy impala and the TCS ( TRACTION CONTROL SERVICE) liught came on..What does this mean?

Feb 25, 2010 | 2006 Chevrolet Impala

Not finding what you are looking for?
2007 Chevrolet Impala Logo

Related Topics:

1,761 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...