Location crankshaft position sensor
I have a 2002 Zouzou rodeo 3.2 need help on how to wire up the cam position sensor in the rear of the motor it has three wires I do not know how to wire it up cannot find no old wires just a melted cam sensor need help how to wire it back up to the PCM please helpWhy do the three wires go to and what color they are and what pain connection they go to please help
For the 4 cylinder it is located in he front part of the engine, remove the spar plug and belts (serpentine) and timing belts cover then it is between 2 gears
It is located at the back of each head. It's a tight fit between the head and firewall. One 10mm bolt holds it in, was not difficult to replace!
Here's a link to your sensor location. Where is the camshaft position sensor located for 1999 3 2L V6 Isuzu Rodeo
2009 post, why spam this, we have answered in full,like 10 times.
For the four cylinder it is located\015\012in the front part of the engine. you have to remove the spark plug\015\012cover cap, then remove the serpentine belt. remove the timing belt\015\012cover, then remove the timing belt cover mounting screw located in between the two gears.
\015\012For the 6 cylinder it is on the back of the drivers side head just\015\012behind the intake manifold screwed in from the outside 10mm bolt.
×
2,046 views
Usually answered in minutes!
×