At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 13:05
https://www.youtube.com/watch?v=wcn39gwPWfI
Oct 1, 2013 - Uploaded by gtarman49
Don's 1999 Ford Ranger shift motor PROBLEM SOLVED. ...How to find replace fix 4x4 transfer case shift module 2002 Ford Explorer 4 wheel ...
? 9:15
https://www.youtube.com/watch?v=9ldrtZODxQ8
Oct 26, 2010 - Uploaded by 1A Auto Parts
How To Install Replace 4x4 Transfer Case Shift Motor Ford Explorer .... transfer case shift module 2002 Ford Explorer 4 wheel drive not working ...
? 3:07
https://www.youtube.com/watch?v=sZw3SS2Pt-4
Nov 3, 2013 - Uploaded by kirk colombo
... transfer case shift module 2002 Ford Explorer 4 wheel drivenot working ..... I replaced the transfer motor so i think it is the control module.
Ford quit making the Ranger in 2011. The code refers to the transfer case and the motor that engages the front drive shaft may be stuck or it may be the transfer case control module. You can try tapping on the motor on the transfer case to see if the contact plate is the problem.
More likely worn out bearings which are periodically seizing - have you checked the PS pump with the belt off? You should also check the other devices run by the belt for bearing trouble, particularly the idler pulley. Periodic seizing problems with worn bearings on any of these can cause the truck to stall and the low pressure signal.
the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.
The module is located behind the drivers side rear wheel "interior" panel cover. Not likely that the module is at fault. There is a small plastic ring that fits around a little metal stud on the electrical plate located on the transfer case side of that little motor that you replaced. If that little plastic ring is missing or smashed then that electrical plate rotates just a little too far and then it no longer touches where it should. Its like the power comes on when you first replace it but never again after that. Take that little motor off again and make sure that plastic ring is intact.
×