1998 Ford Ranger SuperCab Logo

Related Topics:

A
Anita Posted on Aug 11, 2016

Valve Clearences For A Ford Ranger WE Engine

WE Engine

1 Related Answer

Anonymous

  • 5158 Answers
  • Posted on Jan 26, 2009

SOURCE: Ford Ranger PCV valve.

should be on the valve cover... goes into the cover thru a rubber gromet with a vacuum hose attached.

Robert

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the pcv valve located on a 88 ford ranger with a 2.0 engine

It should be on top of the VALVE COVER PULL HOSE AND PVC VALVE IS AT END IF IT IS NOT MAKING A NOISE WHEN YOU SHAKE IT REPLACE IT
0helpful
4answers

Location of pcv valve on 2005 ford ranger 4.0

positive crankcase valve is located on the back of the valve cover on the right valve cover i believe if your looking at the engine, you will need to remove some hoses to be able to access the pcv valve, here is a diagram to helpnissankid88_1.gifnissankid88_2.gif
1helpful
1answer

2001 ford ranger 3.0 L need to know if the coolant inters the heater core through the hose with the heater valve on it or the one with ont the heater valve

Flow is from engine to heater control valve to heater core back to engine. IE the hose with the valve is the heater IN,
0helpful
1answer

I need to know the valve clearance for a 1985 ford ranger 2.8 liter engine?

Ford uses hydraulic valve lifters,turn engine over to install rockers,engine oil pressure keeps valves constantly adjusted.
4helpful
2answers

Location of the egr sensor on 2000 ford ranger

The EGR pressure sensor is located within inches of the EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts.
0helpful
1answer

Ford Ranger PCV valve.

should be on the valve cover... goes into the cover thru a rubber gromet with a vacuum hose attached.

Robert
0helpful
1answer

Does a ford Ranger have a PCV valve???

it should be on top of the valve cover.. all cars and trucks have them but sum and not many have 1's that never need to be replace..
0helpful
1answer

Check Engine Light

with the purge valve powered up vacuum should flow through it. the purge flow sensors can go bad on these (between engine and purge valve)
5helpful
1answer

1995 Ford Ranger ( engine light ) and stuff need help plz

if your obd2 scanner fits the connection you have obd2, obd1 connector is way differnt.

your code p1443
Control System
Canister Purge
Valve (Mechanical)
Malfunction
Monitors the fuel vapor
flow between the
engine intake manifold
and the EVAP
canister. The system
failure occurs when a
leak or blockage
between the intake
manifold, the EVAP
canister purge valve
and the EVAP canister
is detected by the
PCM.
l Pinched, blocked or
plugged fuel vapor
tubes/hoses (except
between fuel tank and
EVAP canister)
l Damaged EVAP
canister
l Disconnected, cracked
or cut fuel vapor
tubes/hoses (except
between fuel tank and
EVAP canister)
l Damaged EVAP
canister purge valve
Check for audible vacuum
noise in the engine
compartment or significant
fuel odor in the engine
compartment or near the
EVAP canister.

This link has all the codes you need.
http://rockledge.home.comcast.net/~rockledge/RangerPictureGallery/DTCs.pdf
Not finding what you are looking for?

354 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...