SOURCE: trucks shakes engine lights comes on
You have a engine ignition miss, poss defective coil, get the trouble code out of memory to find out which cylinder is the problem, Kragen does the trouble code test for free.
SOURCE: 2001 MERCURY MOUNTAINEER V8 DRIVES PERFECT UNTIL
This is often the result of a tire that is out of balance. Check for bubbles on any of the tires and have the tires balanced. That should clear up the problem.
SOURCE: MY 2004 MERCURY MOUNTAINEER ENGINES LIGHT IS
Have the codes scanned for your engine computer to see what subsystem is causing the engine light to go on. One can do this for free at many parts stores.
SOURCE: my 2007 mountaineer started to
Your problem could be something as small as a vacuum hose that could have come of or broke.To get a better idea of whats going on take your car to a local auto parts store and have them retrieve the codes from the computer .These codes will point you in the direction you need to go to fix you situation.If I had the codes I could help a little more with your problem.
Start by checking the tie rod ends on both sides on the front wheels..With the truck jacked up and jack stands underneath the frame both left and right wheels should be suspended in mid air..The are two tie rod ends on each side of the vehicle, a inside and outside tie rod..Check for any excessive place on each one...
Also ckeck the balance on all four tire's... Inspect the wheels for any stress cracks that would cause them to not to balance correctly and make your vehicle shake...
Check the transmission mounts on the cross member,make sure the mount is secure to the Trans and cross member mount..Also check both u-joints on the drive shaft and any hanger bearings that may be underneath there..If it's a 4 wheel drive check both drive shaft's...Anyone of these option's could show those
symtom's you mentioned...Good luck and let me know how it works out..
104 views
Usually answered in minutes!
×