It cant be disconnected if lost or damaged key fob and your using key to unlock door for entry -you have a few seconds to put key in ignition and turn on dont have to start it but need to turn on this resets alarm key is like a passcode you enter with a house alarm no code [key]alarm goes off
Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the CTD armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the BCM stores the CTD mode status in memory.
?€¢
To disarm the CTD system in arm pending mode, SECURITY indicator flashing and doors open, perform 1 of the following:
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
?€¢
To disarm the CTD system in the armed mode:
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
?€¢
To disarm the CTD system when activated, alarming mode.
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
Insert the key into the ignition and turn it to the "ON" position. There is no need to start the car.
Press the button located in the center of the instrument cluster ONCE. The display should now read "OIL LIFE" instead of vehicle mileage.
597 views
Usually answered in minutes!
×