Question about 2009 Saturn Aura

1 Answer

Auto transmission 6 speed valve body torque specs and diagram

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 85,223 Answers

You will need a factory service manual for that kind of very detailed info. I suggest you try and find a used one on eBay. I buy all my manuals there very cheap compared to new. Also CD's can be found..

Posted on May 16, 2016

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 ford explorer Manual trans. 2 door 6 cyl. 2 wheel drive repair diagrams


As per what you requested Transmission to engine bolts: 35 lb-ft (E/MWM).

But if you need more torque specs for other parts of your vehicle.I suggest you to check the link below with complete torque specification list and helpful diagrams.
http://www.allcarhelp.com/2016/05/torque-specs-for-bolt-size-of-bolts.html
This will help.
Thanks.

May 08, 2016 | 1996 Ford Explorer

1 Answer

What are the torque specs for the 5 bolts that secure the Transmission Manual Valve Position Pressure Switch


Torque specs on on 4L60 tranny pan in 04 escalade??

www.cadillacforums.com/.../cadillac-escalade.../260881-torque-specs-4l6...
May 26, 2012 - 3 posts - ‎3 authors Has 104000 miles on it now, figured it's time to change the filter and the fluid. ...Cadillac Escalade, EXT and ESV Forum - 1999 - 2006 Discussion, ... Flywheel toTorque Converter Bolt ... Transmission Fluid Pressure Manual Valve Position Switch to Valve Body Bolt ... Powered by vBulletin® Version 4.1.5 Re: SRX V8 Valve Cover Gasket Replacement Write Up ...
14 posts
Jun 10, 2015
2000 DTS Setting up Internal Mode Switch - 4T80E ...
9 posts
Aug 27, 2014
More results from www.cadillacforums.com

Nov 19, 2015 | 2000 Cadillac Escalade

2 Answers

What is the area on a c-6 automatic transmission that is just above the filter?


That is the VALVE BODY. Torque specs for tightening the valve body bolts must be followed precisely to assure continued operation of the transmission.
There is also a NECESSARY gasket at the top of the filter that must go between the filter and the valve body, otherwise the transmission will suck air and "slip" when shifting from 1st to 2nd.

May 23, 2015 | Cars & Trucks

2 Answers

Where is the torque converter clutch solenoid located P0744


troubleshooting?
  • cvt re0f10a
p0744 torque converter

description
this malfunction is detected when the torque converter clutch does not lock-up as instructed by the tcm. this is not only caused by electrical malfunction (circuits open or shorted), but also by mechanical malfunction such as control valve sticking, improper solenoid valve operation, etc.

dtc logic

dtc detection logic
159975295

dtc confirmation procedure

caution:
always drive vehicle at a safe speed.

note:
if "dtc confirmation procedure" has been previously performed, always turn ignition switch off.
then wait at least 10 seconds before performing the next test.
1.check dtc detection
with consult-iii
  1. turn ignition switch on.
  2. select "data monitor".
  3. start engine and maintain the following condition for at least 30 seconds.
159894994

with gst
follow the procedure "with consult-iii".
is "p0744" detected?
yes - go to see: cvt re0f10a.
no - check intermittent incident. refer to see: testing and inspection\initial inspection and diagnostic overview\intermittent incident.

diagnosis procedure
1.check line pressure
perform line pressure test. refer to see: transmission and drivetrain\continuously variable transmission/transaxle\testing and inspection\initial inspection and diagnostic overview\cvt re0f10a.
is the inspection result normal?
yes - go to 2.
no - repair or replace damaged parts.
2.check torque converter clutch solenoid valve
  1. turn ignition switch off.
  2. disconnect cvt unit connector.
  3. check torque converter clutch solenoid valve. refer to see: cvt re0f10a. is the inspection result normal?
yes - go to 3.
no - repair or replace damaged parts.
3.check lock-up select solenoid valve
check lock-up select solenoid valve. refer to see: cvt re0f10a.
is the inspection result normal?
yes - go to 4.
no - replace transaxle assembly. refer to see: transmission and drivetrain\continuously variable transmission/transaxle\service and repair\removal and replacement\cvt re0f10a\transaxle assembly\exploded view.
4.check secondary speed sensor system
check secondary speed sensor system. refer to see: p0720\cvt re0f10a.
is the inspection result normal?
yes - go to 5.
no - repair or replace damaged parts.
5.check primary speed sensor system
check primary speed sensor system. refer to see: p0715\cvt re0f10a.
is the inspection result normal?
yes - go to 6.
no - repair or replace damaged parts.
6.detect malfunctioning items
check tcm connector pin terminals for damage or loose connection with harness connector.
is the inspection result normal?
yes - replace tcm. refer to see: powertrain management\transmission control systems\control module, cvt\service and repair\cvt re0f10a\exploded view.
no - repair or replace damaged parts.

component inspection (torque converter clutch solenoid valve)
1.check torque converter clutch solenoid valve
159962448

check resistance between cvt unit terminal 12 and ground.

159975296

is the inspection result normal?
yes - inspection end
no - perform "self-diag results" mode for "transmission".

component inspection (lock-up select solenoid valve)
1.check lock-up select solenoid valve

159962449

check resistance between cvt unit terminal 13 and ground.

159975297

is the inspection result normal?
yes - inspection end
no - replace transaxle assembly. refer to see: transmission and drivetrain\continuously variable transmission/transaxle\service and repair\removal and replacement\cvt re0f10a\transaxle assembly\exploded view.

Jan 21, 2015 | 2010 Nissan Altima 2.5

4 Answers

Code p0894 2004 trailblazer


Found that code very easily on Google. Is is a transmission code in relation to the TCC (torque converter clutch). Could be a lack of maintenance, burnt fluid or debris in the fluid. Could also be a bad TCC solenoid or another internal trans issue. You will more than likely need to visit a qualified transmission repair facility unless you are good with trans internals.

Sep 15, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

Location of the torque converter clutch silonoid on a 2001 chevy venture


TORQUE CONVERTER CLUTCH SOLENOID IN THE SIDE PAN OF THE TRANSMISSION. IN THE VALVE BODY.YOU NEED A VALVE BODY DIAGRAM.YOU HAVE MORE THAN ONE SOLENOID IN TRANSMISSION VALVE BODY. GET THE CHEVROLET DEALERSHIP PARTS DEPARTMENT SALESPERSON SHOW YOU DIAGRAM ON HIS COMPUTER THAT WAY IT WILL GIVE YOU IDEA ITS LOCATION ON THE VALVE BODY.

Jan 10, 2011 | 2001 Chevrolet Venture

1 Answer

My sister has a 1998 Audi A4 (automatic transmission). She tells me that there is a acceleration problem. The engine will rev to the moon then all of a sudden the gear will catch and away she goes. I...


SOUND LIKE TRANSMISSION SLIPPING. CHECK TRANSMISSION FLUID LEVEL.IF FLUID LEVEL OKAY BUT FLUID LOOKS DARK SMELL BURNT.CHANGE TRANSMISSION FLUID AND FILTER ADD SOME VALVE BODY TREATMENT TO LOOSEN STICKEN SHIFT VALVES.ADD TO TRANSMISSION FLUID DONT OVER FILL TRANSMISSION WILL CAUSE OVERHEAT. IF TRANSMISSION FLUID GOOD FILTER ALREADY BEEN CHANGED.IF ALL GOOD ENGINE BEEN TUNED UP OTHER POSSIBLE CAUSES FOR TRANSMISSION SLIPPING NOT GOING TO OVER DRIVE COULD BE THROTTLE SHIFT CABLE OUT ADJUSTMENT OR STRETCHED. TORQUE CONVERTER FAULTY OR SHIFT VALVES TO TORQUE CONVERTER OR OVER DRIVE STUCK IN VALVE BODY. VALVE BODY FAULTY. AND HAVE VECHICLE SCANNED FOR FAULTY VECHICLE SPEED SENSOR OR FAULTY THROTTLE CONTROL MODULE OR FAULTY THROTTLE POSITION SENSOR. THEY WILL EFFECT TRANSMISSION SHIFT TO OVER DRIVE IF FAULTY.

Dec 22, 2010 | Audi A4 Cars & Trucks

1 Answer

Torque converter locks up and wont release until it cools off


U may need to replace the torque converter and the torque converter clutch control solenoid inside the transmission it is mounter to the valve body, there is one thing you can try 1st, change the fluid in the transmission and the TCC (Torque Converter Clutch) solenoid, use the new GM spec DEXRON VI transmission fluid, there is a good chance you can fix this by doing these cheaper service and part replacement, if that doesn't work the tranmission must be removed and the torque replaced

May 22, 2010 | 1993 Pontiac Grand Am

2 Answers

46RH transmission, no second gear.


Does it shift into 3rd at the right speed? If 2nd is just missing, try adjusting the kickdown band. (front band). The adjustment screw is on the outside of the case.

Apr 24, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
2009 Saturn Aura Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...