2.5l 4 cyl. How can I set timing? - 1997 Dodge Dakota

https://www.amsoil.com/lookup/auto-and-light-truck/1998/chrysler/sebring-convertible/2-5l-6-cyl-engine-code-h-eeb-h/

It appears you need a 'timing kit'. This article is pretty good.

https://www.vwvortex.com/threads/diy-2-5l-timing-chain-replacement.7256946/

..

Here's a link. Check the Belts 2004 2006 Scion xB 2005 Scion xB 1 5L 4 Cyl Here's a picture layout William. 2005 Scion XB Drive belt replacement

Parking Light Change 2013 2015 Nissan Altima 2013 Nissan Altima 2 5L 4 Cyl...


This will show you how to change your bulb

Watch this video link...


Headlight Change 2007 2011 Toyota Yaris 2011 Toyota Yaris 1 5L 4 Cyl Sedan

Hi James,
I have this link for you that has a video as well on how to do it. Hope it helps.
Battery Replacement 2010 2012 Ford Fusion 2010 Ford Fusion SE 2 5L 4 Cyl

These videos shoild help.
Bob
Chrysler Mastertech 1997 Introduction to 2 7L 3 2L 3 5L V6 engines Part 2
Chrysler Mastertech 1997 Introduction to 2 7L 3 2L 3 5L V6 engines Part 3

this is the first thing i would do since it has not run for a long time.
1 make sure it has fuel, check filter, loosen the bolt securing the fuel line to the pump and see if fuel is coming out, if it does you have fuel in the injection pump. retighten.
2 loosen nuts on injection lines to injectors 4 if you have 4 cyl. eng.
and crank the engine (start) until you see fuel coming out from each line then re-tighten lightly. start the engine*, it may take a while for the engine to run if the glow plugs are not working properly. once the engine is running its time to bleed or purge air out of the line, to do this
loosen one at a time the nut you have re-tightened lightly until fuel and air come out, tighten when no visible air bubble only solid fuel stream. do this on the rest of the injectors, you will feel the engine run smooth.

*if there is no fuel coming out after continuous cranking the engine for 30 sec to a minute, injection pump may have a problem possibly the rotor vanes inside the pump is stuck due water in fuel and engine not running for a long time. you may have to have the injection pump overhauled and recalibrated.

These tube videof should be helpful.
Bob

Chrysler Mastertech 1997 Introduction to 2 7L 3 2L 3 5L V6 engines Part 3

Chrysler Mastertech 1997 Introduction to 2 7L 3 2L 3 5L V6 engines Part 2

if u go on yahoo.com type 1995 mazda 626 timing and click on search images you will see a picture of how to set it.